Table of Contents
Advertisement
10
ASSEMBLING AND PREPARING
Detaching the Stand Base
1
Place the screen face down.
CAUTION
To protect the screen from scratches, cover
y
the surface with a soft cloth.
2
1
Turn the screw to the left.
2
Pull out the Stand Base.
2
2
Stand Body
3
As shown in the illustration,put your hand on
the right groove of cable holder, pull cable
holder out to separate it from the set.
Cable holder
Stand Base
4
Remove the two screws on the back of stand
body.
As shown in the illustration, disconnect the
stand body from the stand hinge.
Stand Hinge
CAUTION
Illustrations in this document represent typi-
y
cal procedures, so they may look different
from the actual product.
Do not carry the monitor upside down by just
y
holding the stand base. This may cause the
monitor to fall off the stand and could result
in personal injury.
When lifting or moving the monitor, do not
y
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
If you use the monitor panel without the
y
stand base, its joystick button may cause
the monitor to become unstable and fall,
resulting in damage to the monitor or human
injury. In addition, this may cause the joystick
button to malfunction.
Screws
Stand Body
Advertisement
Table of Contents
