Table of Contents
Advertisement
4:3 or wide image ratio / >
When there is no OSD, press hotkey continuously to change 4:3 or wide image ratio. (If the product screen size is
4:3 or input signal resolution is wide format, the hot key is disable to adjust. ).
Auto / Exit / Source hot key
When there is no OSD, press Auto/Source button continuously about 2 second to do auto configure. When the
OSD is closed, press Source button will be Source hot key function. Press Source button continuously to select the
input source showed in the message bar, press Menu/Enter button to change to the source selected.
Clear Vision
When there is no OSD, Press the "<" button to activate Clear Vision.
1.
Use the "<" or ">" buttons to select between weak, medium, strong, or off settings. Default setting is always
2.
"off".
Press and hold "<" button for 5 seconds to activate the Clear Vision Demo, and a message of "Clear Vision
3.
Demo: on" will be display on the screen for a duration of 5 seconds. Press Menu or Exit button, the message
will disappear. Press and hold "<" button for 5 seconds again, Clear Vision Demo will be off.
Clear Vision function provides the best image viewing experience by converting low resolution and blurry images
into clear and vivid images.
21
Advertisement
Table of Contents
