Tube Works 913 User Manual

Tube driver rack mount

913

TUBE DRIVER RACK MOUNT

USER MANUAL

Congratulations on your purchase of the new TUBE DRIVER RACK Model #913. This

rack is an up-dated and more cost-effective design from the originator of the TUBE

DRIVER concept, B.K. Butler. We are confident this unit will be a welcome addition to

your tube sound.

TAKE TIME TO KNOW THE "RACK"

The rack is a very versatile unit. Please take the necessary time to look over this man-

ual and become familiar with the basic layout of controls as well as the unique fea-

tures. Take time and let your ears guide you through the tonal possibilities. The EQ

section has been carefully optimized for current and classic playing styles and has an

extremely wide range of control. It is possible that you may be just a tweak away from

your desired sound, so be patient and jot down the settings that you prefer most. Also

be aware of the range of uses this product was designed for... Everything from use as

an effects rack to that of a stand-alone pre-amp.

APPLICATIONS OVERVIEW

The TUBE DRIVER RACK is more versatile than one might expect at first glance.

While the basic design is an "effects" rack, it has several other functions as well. For

example, it can be used as a stand -alone pre-amp for basic power amps of any power.

The authentic "Tube" sound is thus produced at a SPL (Sound Pressure Level) pote n-

tially exceeding any combo or stage amp made today! Another use finding great ap-

peal is the use of the unit "direct to the board" in recording work. The tremendous gain

potential within the unit, in addition to the exceptional output headroom, insure com-

patibility in a wide range of recording applications. There are, of course, the usual e f-

fects loop uses as well.

Table of Contents

Do you have a question about the 913 and is the answer not in the manual?

Page 1: User Manual
TUBE DRIVER RACK MOUNT USER MANUAL Congratulations on your purchase of the new TUBE DRIVER RACK Model #913. This rack is an up-dated and more cost-effective design from the originator of the TUBE DRIVER concept, B.K. Butler. We are confident this unit will be a welcome addition to your tube sound.
Page 2 "Master" volume setting, giving you the ability to switch in a volume boost for leads when- ever you want. This control is particularly useful it you happen to be using an all-tube amp or an amp with a built-in distortion sound you like. Try experimenting with your amp using the fol-...
Page 3 In addition, by the use of this device, user agrees to hold Genz Benz Enclosures/Tube Works, its designers, sales agents and all other affiliates and related parties harmless in the event of any accident, injury, damage or loss resulting from such use.
Page 4 Damage due to misuse, modification or abuse is excluded from this warranty. If service is required, you must contact Genz Benz Enclosures/Tube Works for a RETURN MERCHANDISE AUTHORIZATION NUM- BER (RMA) by calling 480-941-0705. Whenever possible please use original packaging ma- terial for all returns, this will insure that the units are not further damaged in transit.

Tube driver rack 913