LG 28TK410D Owner's Manual page 21

To use TV speaker
(Settings) Sound Sound Out
[Depending on model]
Sound is output through the TV speaker.
To use Headphone
(Settings) Sound Sound Out
[Depending on model]
Sound is output through the headphone connected to the ear-
phone/ headphone port.
To synchronize audio and video
(Settings) Sound AV Sync Adjustment
[Depending on model]
Synchronizes video and audio directly when they do not match.
If you set AV Sync Adjustment to On, you can adjust the sound
output (TV speakers) to the screen image.
y If you select the Bypass, Outputs the broadcast signals or the
sound from external devices without any audio delay. The audio
may be output before the video because of the time the TV takes
to process the video input.
PIP Setting
(Settings) General PIP
[Depending on model]
y Mode : Shows or hides the sub-screen.
y Sub Input : Select the input on the sub-screen.
y Position : Adjusts the position of the sub-screen.
y Size : Adjusts the size of the sub-screen.
y Sound : Switches to the main screen sound or the sub screen
sound.
y The PIP function is only available in the following mode:
- Main : RGB-PC Sub : DTV / ATV / HDMI
- Main : HDMI Sub : DTV / ATV / Component
y The PIP settings can also be set using
y Press the PIP button on the remote control to show or hide the
sub-screen.
y The PIP function is not available when SIMPLINK is activated.
Setting USB AutoRun
Internal TV Speaker
Play photos or videos of USB automatically when TV is turned on or
USB is connected.
y Off : Turn off the USB AutoRun.
y Videos : Play videos of USB automatically.
y Photos : Play photos of USB automatically.
Wired Headphones
y Only plays the files in the top level folder of the USB device in
y While playing, press the
y If the files are invalid or corrupted, the following message appears
y When the USB device is reconnected after being disconnected
To use SIMPLINK
[Depending on model]
SIMPLINK is a feature that enables you to control and manage vari-
ous multimedia devices conveniently via the SIMPLINK menu.
1 Connect the TV's
2 Select
3 In SIMPLINK Setting window, set SIMPLINK function to On.
4 Configure the Auto Power Sync settings to On or Off.
5 In SIMPLINK menu window, selects the device you want to
y You can also set the SIMPLINK in
y This function is only compatible with devices with the SIMPLINK
y To use the SIMPLINK function, you need to use a high-speed
.
y If you switch to another input, the SIMPLINK device will stop.
y If a third-party device with the HDMI-CEC function is also used,
y If you select or play media from a the device with a home theatre
(Settings) General USB AutoRun
sequence.
or
control to end this function.
before returning to the previous input status: "This file is invalid."
during video playback, Continue watching starts automatically
and resumes the video from the last viewed scene (only applies
to the first video).
terminal and the SIMPLINK device's
HDMI output terminal using an HDMI cable.
(Settings) General
SIMPLINK menu window appears.
control.
SIMPLINK.
logo.
HDMI® cable (with CEC (Consumer Electronics Control) feature
added). High-speed HDMI® cables have the No. 13 pin connected
for information exchange between devices.
the SIMPLINK device may not work normally.
function, the HT Speaker is automatically connected.
button on the remote
SIMPLINK.
(Home) Inputs
13