Download Print this page

Tube Works 301 User Manual page 2

Tube floor- mounted overdrive/preamp

Advertisement

GENERAL NOTES
Although the Rock is very ruggedly housed in heavy gauge steel,
care should be given to the unit as tubes are made from glass.
Avoid physical abuse. A soft touch to the footswitch is all that is
needed to switch the unit. You will notice the absence of a power
switch on the Rock. This was intentional on the part of the de-
signer. There is no possibility of unwanted power loss during a
performance, and power switches are just one more area of
eventual wear- out that has to be avoided. The Rock has been
designed for prolonged periods of continuous use without over-
heating or damage. It has been observed that the REAL TUBE
sound is actually enhanced with use as the tube ages.
SPECIFICATIONS
VOLTAGE REQUIREMENT
TUBE TYPE
INPUT IMPEDANCE
SIN RATIO
DRIVE SENSITIVITY
HUM & NOISE
OUTPUT HAPEDANCE
OUTPUT LEVEL
WEIGHT
: 120 VAC, 9 WATTS
:12AX7/ECC83-SELECTED
:1 MEG. OHMS
:70 dB (Typical)
-65dBV (.043Mv)
:-85 dB (Typical)
:10K OHMS (Typical)
:0 dBV (.78 V Typical)
:3 lbs. shipping

Advertisement

loading

This manual is also suitable for:

301 rock tube drive