Table of Contents
Advertisement
16.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press Spin Speed and, at the
2.
same time, turn the programme
selector to position 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
To change the value, press - / + .
4.
To save the changes, switch off
5.
the appliance.
Cleaning and servicing
17 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Tips on appliance care
Follow the tips for appliance care to
ensure your appliance works cor-
rectly in the long term.
Wipe down the
housing and the
control panel
The appliance
parts remain
clean and hy-
gienic.
Cleaning and servicing en
with nothing but
water and a
damp cloth.
Remove all de-
tergent residue,
spray residue or
other residues
immediately.
Keep the appli-
ance door and
detergent drawer
open after use.
17.2 Cleaning the drum
If you often wash at a washing tem-
perature of 40 °C and lower or the
appliance has not been used for a
long period, clean the drum.
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
▶
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
▶
every operation with the door
open, and leave the detergent
drawer to dry.
Run the Drum Clean programme
▶
without laundry.
Add washing powder.
17.3 Cleaning the detergent
drawer
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Fresh deposits
are easier to re-
move without
leaving any
residue.
This allows the
residual water to
dry, reducing
odours in the ap-
pliance.
47
Advertisement
Table of Contents
