Table of Contents
Advertisement
en Cookware test
Display
Setting
Power limitation
Enables the total power of the hob to be lim-
ited, if necessary, based on the conditions of
your electrical installation. The available set-
tings depend on the maximum power of the
hob (see rating plate). If the function is active
and the hob has reached the set power limit,
is displayed and you cannot select a higher
power level.
MoveMode
Allows you to change the preset power levels
for the three cooking areas of the flexible
cooking zone.
Select one of the two cooking zones, set the
required power level in the settings area and
touch
to confirm the new power level and
select the next cooking zone.
Cookware test
You can use this function to test the quality
of the cookware.
FlexInduction
Change the switch-on mode for the Flex
Zone.
Restoring factory settings
1
Factory setting
17.2 To go to the basic settings
Requirement: The hob must be switched off.
1.
To switch on the hob, touch
Within the next 10 seconds, press and hold for 4
2.
seconds.
Product information
Directory for the technical after-sales
service (TK)
Production number
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. To call up the individual displays, touch the
control panel.
18 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the size of the cookware
base corresponds to the size of the cooking zone be-
ing used.
Access is via the basic settings. → Page 15
16
.
Display
.
.
Value
– Switched off. Maximum power of the hob
- 1000 W. Lowest power setting.
. - 1500 W.
...
- 3000 W. Recommended for 13 A
. - 3500 W. Recommended for 16 A.
- 4000 W.
. - 4500 W. Recommended for 20 A.
...
- Maximum power of the hob.
- Preset power level for the front cooking zone.
- Preset power level for the middle cooking zone.
. - Preset power level for the rear cooking zone.
- Not suitable.
- Not optimal.
- Suitable.
- As two independent cooking zones.
- As a connected cooking zone.
1
- Individual settings
.
- Factory settings.
Touch to access the basic settings.
3.
and light up as a presetting.
a
Touch repeatedly until the desired setting ap-
4.
pears.
Select the required setting in the settings area.
5.
Touch and hold for 4 seconds.
6.
a The settings are saved.
17.3 Discarding changes to the basic
settings
Touch
.
▶
a All changes are discarded and not saved.
18.1 Carrying out Cookware test
As a single cooking zone, the flexible cooking zone is
set in such a way that only the individual item of cook-
ware is checked.
At room temperature, place the cookware with ap-
1.
prox. 200 ml water in the centre of the cooking zone
that best fits the base of the cookware in terms of
size.
Call up the basic settings and select .
2.
1
.
1
Advertisement
Table of Contents
