Installation Menu; Signage Setup - LG 98LS95A-5B.AUS Owner's Manual

4

INSTALLATION MENU

NOTE
Some features described in the Installation manual may not be supported in certain models.
y y

Signage Setup

Use this menu to configure the digital signage after installation.
Power On Status
You can select the operating status of the monitor when the main power is switched on.
y y
You can select from among PWR, STD, and LST.
y y
PWR sets the status of the monitor to On whenever the main power is switched on.
y y
STD sets the status of the monitor to Standby when the main power is switched on.
y y
LST sets the status of the monitor back to its previous status.
y y
IR Operation
If you set IR Operation to Normal, you can use the remote control.
y y
If you set IR Operation to Power Key Only, you can only use the Power Key.
y y
If you set IR Operation to Block All, you cannot use the remote control.
y y
Local Key Operation
If you set Local Key Operation to Normal, you can use the Local Key.
y y
If you set Local Key Operation to Power Key Only, you can only use the Power Key.
y y
If you set Local Key Operation to Block All, you cannot use the Local Key.
y y
Wake On LAN
You can set whether to use the Wake On LAN feature.
y y
You can set this option to On or Off.
y y
If you set this option to On, the Wake On LAN feature is enabled and you can turn on the product remotely via
y y
LAN.
If you set this option to Off, the Wake On LAN feature is disabled.
y y
No Signal Power Off (15 Min)
You can choose whether to use the 15 Min Force Off feature.
y y
You can set this option to On or Off.
y y
If you set this option to On, the product turns off when it has remained in No Signal status
y y
for 15 minutes.
If you set this option to Off, the 15 Min Force Off feature is disabled.
y y
Set this option to Off when you use the product for a long period of time.
y y