Do you have a question about the Omega-X and is the answer not in the manual?
Questions and answers
Summary of Contents for Shield Omega-X
Page 1
Shield Omega - X Panel Installation Manual Shield Fire, Safety and Security Ltd. Shield Omega - X Panel Installation Manual SH3514-00, Revision E03.04 Issue Date: 1 April 2014...
Page 2
Underwriters Laboratories (UL) File number (S 8485) Fire Alarm Equipment Shiled Fire, Safety and Security Ltd. The Shield Omega - X Panel is suitable as follows: • Local Signaling Unit • Releasing for Omega - X Panels only. Non-Releasing for Omega - X Panels.
Page 3
If trouble is experienced with this equipment Fire Alarm Control Panel, for repairs or warranty information, please contact Shield Fire, Safety and Security Ltd 29th Floor, Reg us Suite, One Canada Square Canary Wharf, London, E14 5DY, UK Tel:+44 0 2077121610.
Page 4
AHJ, or installation of the Supervised Output Module using NFPA Style 7 configuration.” FM Global Technologies LLC (FM APPROVALS) Shield Fire, Safety and Security Ltd Shield Fire, Safety and Security Ltd. Shield Omega - X Panel Installation Manual SH3514-00, Revision E03.04 Issue Date: 1 April 2014...
Page 10
Sample Lmax Calculation ........... 102 Appendix D Door Label Appendix E Operating Instructions Glossary Shield Fire, Safety and Security Ltd. Shield Omega - X Panel Installation Manual SH3514-00, Revision E03.04 Issue Date: 1 April 2014...
Page 11
0 seconds Reference Appendix B, “Equipment List” for model designations of the devices contained in this table. Shield Fire, Safety and Security Ltd. Shield Omega - X Panel Installation Manual SH3514-00, Revision E03.04 Issue Date: 1 April 2014 Page 1 of 118...
Page 12
Introduction This manual describes 2 loop and 4 loop models of the Shield Omega - X Panel. Two loop models include the No Communication SA-P20, the Network Interface Card (Omega - N) SA-P2E. Four loop models include the No Communication with Loop Expansion SA-P4L, the Network Interface Card (Omega - N) with Loop Expansion SA-P4E.
Page 13
Appendix A Specifications provides characteristics of the Omega - X Panel. Appendix B Equipment List provides model numbers for Shield Omega - X Panels, loop replacement parts and compatible Notification Appliances. Appendix C Current Draw Worksheet provides an example for recording and calculating the current draw of the Omega - X Panel and its Signaling Line Circuits, Initiation Devices and Notification Appliances.
Damaged Goods In the event of damage to equipment during transit or any defect in the quality of goods, the Buyer shall Notify Shield within seven days of delivery.The goods may then be returned to the Customer Service Department of Shield for repair, or replacement parts may be supplied (by arrangement).
Page 15
Shield are under no liability if the repaired or replaced components are found to have failed due to fair wear and tear, willful damage, negligence, abnormal working conditions, misuse or alteration or repair without approval or failure to follow the sellers instructions.
Page 16
Section 2 Overview Models of the Shield Omega - X Panel operate SLC devices using Apollo protocol. The Omega - X Panel accepts a variety of industry standard devices for FACP monitoring and reporting. Link the Omega - X Panel with other panels using the proprietary Omega - N to monitor conditions between panels.
KING OF PRUSSIA, PA 19406 Batteries INSTALLATION INSTRUCTIONS PN:VF1537-00 WARNING HIGH VOLTAGE DISCONNECT POWER BEFORE REMOVING Shield Fire, Safety and Security Ltd. Shield Omega - X Panel Installation Manual SH3514-00, Revision E03.04 Issue Date: 1 April 2014 Page 7 of 118...
The figure below illustrates the Omega - X front-panel: Figure 2-2 Controls and Indicators Description LCD display Left-panel-indicators Upper-control-pad Lower-control-pad Right-panel-indicators Shield Fire, Safety and Security Ltd. Shield Omega - X Panel Installation Manual SH3514-00, Revision E03.04 Issue Date: 1 April 2014 Page 8 of 118...
Page 19
Central keypad number two Navigates menu selections to the right. Central keypad number one Navigates menu selections up. Shield Fire, Safety and Security Ltd. Shield Omega - X Panel Installation Manual SH3514-00, Revision E03.04 Issue Date: 1 April 2014 Page 9 of 118...
Page 20
3 Press Reset or Fire Drill on the lower-control-pad. Activates inputs, outputs or actions defined in the configuration by the Programmable customer. Function Shield Fire, Safety and Security Ltd. Shield Omega - X Panel Installation Manual SH3514-00, Revision E03.04 Issue Date: 1 April 2014 Page 10 of 118...
Need help?
Do you have a question about the Omega-X and is the answer not in the manual?
Questions and answers