Summary of Contents for CGOLDENWALL APTP457 Series
- Page 1 Industry Electronic Balance APTP457 Series INSTRUCTION MANUAL CONTACT US Service email : sunflowersmile20130401@hotmail.com Messenger / WhatsApp: +8618357164978 Facebook : CGOLDENWALL...
- Page 2 Before use, please kindly spare some time reading this instructions. If you have any questions or needs while using our scale, please feel free to CONTACT US. We promise to do our best to solve the problem for you and give you a satisfied solution.
-
Page 3: Part 1 Overview And Specifications
Part 1 Overview and Specifications APTP457 High Precision Digital Accurate Analytical Electronic Balance Industrial Weighing and counting scale，features clear display, with high precision, multi-functional and reliable. - Page 4 1. Technical Specifications: Actual Verification Scale Scale Accuracy Ambient Power Model Capacity Division Divisions Classes Temperature Consumption 1kg~10k d=1g 1000g d=0.01g 2000g 1000g 4*R6 AA dry APTP45 2000g batteries 3000g (54mA) d=0.1g e=10d Ⅲ 0~40℃ 5000g DC 9V power 6000g adaptor 7500g 3000g...
- Page 5 2. Key Function Instructions: ON/OFF (5-digit LCD display module) Press ON/OFF key to turn on/off the scale for one time. (6-digit LCD display module) Under turn off situation, press ON/OFF key one time to turn on the balance. Under turn on situation, press ON/OFF key for 3 seconds to turn off the balance.
- Page 6 (6-digit display module) weighing units: g/ct/lb/oz/dr/gn/ozt/dwt/MM/tl.J/tl.T/tl.H/t. Counting Function (PCS) Count pcs according to the percentage value of single sample’s weight. Tare Function (TARE) Put a empty container on, when it is stable, press “Tare” button, it will show “0” and tare mark. Remove the container, press “Tare” button again, the tare function will disappear.
- Page 7 Part 2 Operation Instructions 1. Press the "ON/OFF" key to turn on: In order to make the weighing more accurate, please warm up for more than 3 minutes for better results. (5-digit LCD display module) The scale will flashing display "88888" for 3 seconds, then display "0.0g".
- Page 8 loaded on the weighing pan, press the tare key to make the displayed value return to zero. 4. Counting: Put the sample on the weighing pan, press and hold the "PCS" button for 3 seconds until the display shows "PCS" indicating that it has entered the counting mode.
- Page 9 (Operation of the New Version) Prepare 20 samples (or 10/30/40...) and put them on the weighing pan. Press and hold “PCS” and the scale will display 10. Press “PCS” to add the quantity to 20. (“TARE” button to subtract the quantity.) Make the displayed quantity match to the sample quantity, then press “ON/OFF”...
- Page 10 mode, the display will then show the calibration weight. 2. Put a calibration weights according to the capacity shown on the display. When the display shows “PASS”, the calibration done. PLEASE NOTE: If the weighing after calibration is still inaccurate, repeat the calibration several times as stated above.