Advertisement
Quick Links
ViPowER SATA Direct-Link
Step.1
Step.2
Pull in the SATA MobileRACK.
Secure the SATA MobileRACK
with four retaining screws.
Step.5
Step.6
Secure the drive and inner tray
Replace the inner tray top cover.
with four retaining screws.
MobileRACK Installation Guide
Key-Lock type
Mode No.:
VPA-5010LS2F
VPA-5010KP2F
VPM-5010LS2F
VPM-5010KP2F
VPP-2010LS2F
Key-Lock
VPP-2010KP2F
Unlock / OFF
Position
The Key-Lock and latch-switch support hot-
swapping. Use the Key-Lock or latch-switch to
MobileRACK ON after inserting the inner tray,
and OFF before removing it.
Step.3
Remove the inner tray.
Step.7
Insert the inner tray.
Latch-Switch type
Key-Lock
RIGHT
LEFT
Lock / ON
Unlock / OFF
Lock / ON
Position
Position
Position
Step.4
Slide the top cover off.
Step.8
Slide the Latch-Switch Left
to Lock.
For Internal
Unlike all the other MobileRACK in the market,
ViPowER VPA-5010 series is the only SATA
MobileRACK with worldwide patented Direct
Link technology. Allowing direct HDD connection
without any intermediate cable and/or connector.
Patented
Direct Link
For External
As soon as you purchase VP-9101P, Your SATA
Mobile RACK will become ExternalEnclosure.
Optional Accessory
VP-9101P
External
SATA
Cable
AD/DC input
3.5" HDD
Connect to PC
not included
Advertisement
