Table of Contents
Advertisement
Scanning programmes
manually for Terrestrial
Antenna (Manual Tuning)
Scans digital TV or radio programmes and adds
the found programmes to the programme list.
1. Display [Setup] menu.
2. Use U / u to select [DTV], and press ENTER
( ).
3. Use U / u to select [Terrestrial Setting], and
press ENTER ( ).
4. Use U / u to select [Manual Tuning] and
press ENTER ( ) to display the [Manual
Tuning] menu.
4. Use I / i to select the desired multiplexer
(MUX), and the unit starts scanning
automatically.
5. Use u to select the [Add] and press ENTER
( ) to add the programme the unit scans
automatically.
NOTE
If the [DTV Lock] option is set to [Lock], this
function is available when you enter the password
correctly. (see page 32.)
Editing Programme List
(Channel Edit)
You can remove any digital TV or radio
programs stored on this recorder using the
[Channel Edit] menu.
1. Display [Setup] menu.
2. Use U / u to select [DTV], and press ENTER
( ).
3. Use U / u / I / i to select [Channel Edit] and
press ENTER ( ).
4. Press U to select [DTV] and use I / i to
select [DTV] or [Radio] programme list.
5. Use U / u / I / i to select a programme you
want to skip from the list, and press red
coloured (R) button.
If you do not want to skip the programme,
select the programme and press red
coloured (R) button again.
Use U / u / I / i to select a programme you
want to lock from the list, and press blue
coloured (B) button.
If you do not want to lock the programme,
select the programme and press blue
coloured (B) button again.
If you did not select [Automatic Numbering]
during Auto tuning.
Use U / u / I / i to select a programme you
want to change a programme number,
press coloured (G) button, and use U / u to
replace a programme number and then
press ENTER ( ).
Installation
31
3
Advertisement
Table of Contents
