Samsung HG24EE690 Installation Manual page 36

USB Cloning
¦
USB Cloning is used to download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from
one TV set and upload them to other TV sets.
All the user-defined settings from the TV (Master Set) can be copied to the USB device.
✎ After cloning, certain features are applied when the TV is turned on again.
• Clone TV to USB: This copies stored data from the TV set to the USB device.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter the Interactive menu by pressing buttons in order.
→ → →
• MUTE 1 1
3. Press the ▲ or ▼ button to select "Clone TV to USB", then press the
4. You can verify USB cloning behavior.
• In Progress: during copying data to USB.
• Completed: copy was finished successfully.
• Failed: copy was not finished successfully.
• No USB: USB is not connected.
• Clone USB to TV: This to downloads the stored data in the USB device to TV set.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter the Interactive menu by pressing buttons in order:
ENTER
3. Press the ▲ or ▼ button to select "Clone USB to TV", then press the
4. When the message "Copy data from USB to TV Set. All of the TV Setting values are
changed" is displayed, and then select "OK".
5. You can Make sure USB cloning behavior.
• In Progress: copying data to TV.
• Completed: copy finished successfully.
• Failed: copy did not finish successfully.
• No USB: USB is not connected.
• No File: there is no file to copy on the USB.
✎ Activate copying from USB to TV by pressing
✎ The Hotel TV product family does not support the CLONE function between models that supports the
satellite / T2 operation and models that do not.
For fast, instant cloning during installation, insert a USB drive with master settings from the first TV and press the
Enter key for 5 seconds.
Pre-condition for cloning (check point)
– Cloning should be done between same model.
– Before cloning, all displays should be updated at the latest version (same version).
36
English
→
9 ENTER
ENTER button.
→ → → →
MUTE 1 1 9
ENTER button.
ENTER key for 5 seconds.
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF