4 Use your TV
Switching on your TV and putting it in Standby
mode
* Control Keys are on the Side of the Unit
TV
To Turn the TV On from Standby or Off to Standby
Press B on the Side of the Unit or the Remote Control.
●
Note(s)
Energy Consumption contributes to air and water pollution. When the AC Power Cord
●
is plugged in, your TV consumes energy with a very low standby Power Consumption.
Adjusting Volume
* Control Keys are on the Side of the Unit
TV
To decrease or increase Volume
Press VOL J (-) / K(+) on the Side of the Unit or press VOL + / – on
●
the Remote Control.
VOL J(-) : Volume Down
VOL K(+) : Volume Up
To mute or unmute sound
Press D on the Remote Control to Mute the sound.
●
Press D again on the Remote Control or VOL + / – to recover the
●
original sound.
Remote Control
Remote Control
Switching Channels
*
Control Keys are on the Side of
the Unit
TV
To select Channels by using CHI (+) / H(-) or CH + / –
Press CH I(-) (Down) / H(+) (Up) on the Side of the Unit or press
●
CH + / – on the Remote Control.
To select Channels by using the NUMBER keys
Digital TV Operation
For Digital channels, press a number followed by a dot "•" and the
●
corresponding sub channel number.
When selecting Digital channel 11.1
–
Be sure to press • before entering the subchannel number.
Cable / NTSC (Analog) TV Operation
When selecting Cable or Analog channel 11
–
Press PREV.CH to return to the previously viewed channel.
Note(s)
To select the non-memorized Channel list channels, use the NUMBER keys.
●
No signal will appear on the TV screen after the subchannel broadcast is over.
●
Audio only program message will appear on the TV screen, when you receive only a
●
sound signal.
17
.
English
Remote Control