NOTE : Specifications and others are subject to change without notice for improvement.
1. Application Range
This spec sheet is applied all of the TV used LW45A chassis.
2. Specification
Each part is tested as below without special appointment
1) Temperature : 25 ˚C ± 5 ˚C (77 ˚F ± 9 ˚F),
CST : 40 ˚C ± 5 ˚C
2) Relative Humidity : 65 % ± 10 %
3) Power Voltage : Standard input voltage
(100 V - 240 V ~, 50 / 60 Hz)
· Standard Voltage of each products is marked by models
4) Specification and performance of each parts are followed
each drawing and specification by part number in accord-
ance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
3.Test method
1) Performance : LGE TV test method followed
2) Demanded other specification
- Safety : CE,IEC specification
- EMC : CE,IEC specification
4. General specification
4.1. Operating/Storage environment
1
Operating Environment
2
Storage Environment
4.2. RGB-PC
No.
Item
1
Supported Sync. Type
2
Operating Frequency
3
Resolution
Copyright ©
LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATION
Temp : 10 °C ~ 35 °C
Humidity : 20 % ~ 80 %
Temp : -10 °C ~ 60 °C non condensing
Humidity : 5 % ~ 90 % non condensing
Specification
Separate Sync.(RGB)
Horizontal
Analog
Vertical
Max
Recommend 1920×1080 @ 60 Hz
Max
Analog
Recommend 1366×768 @ 60 Hz
Max.
Recommend 1600×900 @ 60Hz
- 6 -
Remarks
30 ~ 69 kHz
22MT47A, 24MT47A,28MT47A,29MT47A
22MT48A,22MT48N,24MT48N
56 ~ 61 Hz
1920×1080 @ 60 Hz
21MT47A,22MT47A, 22MT48A,22MT48N
1366×768 @ 60 Hz
24MT47A,24MT48N,28MT47A,29MT47A
1600×900 @ 60Hz
1600×900 @ 60Hz
1600×900 @ 60Hz
LGE Internal Use Only