Download Print this page

Audyssey APM1 User Manual

Professional microphone multeq-x

Audyssey Professional Microphone 1

User Guide for MultEQ-X

Table of Contents

Need help?

Do you have a question about the APM1 and is the answer not in the manual?

Page 1 Audyssey Professional Microphone 1 User Guide for MultEQ-X...
Page 2 APM1 for MultEQ-X User Guide Overview: This guide provides details for using the APM1 microphone from the Audyssey Custom Installer with MultEQ-X compatible AV receivers. The guide assumes access to an APM1 microphone, ACP2 calibrated preamp and supplied cables plus a CIK0021 RCA – 1/8” Mic Adapter.
Page 3 APM1 for MultEQ-X User Guide Connecting Components: A. Connect a mini-XLR cable to the microphone. B. Place the microphone stand upright and extend the boom arm. Attach the microphone holder to the end of the boom arm. Insert the microphone into the holder so it points to the ceiling.
Page 4 APM1 for MultEQ-X User Guide MIC IN E. Connect the RCA connector from the mini-XLR-to-RCA adapter to the RCA socket of the RCA-to-1/8”- mic adapter. F. Connect the 1/8” connector of the RCA-to-1/8”-mic adapter to the mic input jack of the AVR.
Page 5 AVR. • On the ‘Measure’ or ‘Adjust Sub Levels’ page select ‘Add New Mic’: Select APM1 and enter the serial number of your APM1 microphone in the serial number box: • Click the ‘Download Mic File’ button. After a short time the status should show that the mic file was •...