Troubleshooting - Philips HTD3514/F8 User Manual

Table of Contents

Advertisement

Subwoofer
Output power: 50 W RMS (30% THD)
Impedance: 8 ohm
Speaker drivers: 133 mm (5.25") woofer
Dimensions (WxHxD):
160 x 265 x 265 mm
Weight: 2.5 kg
Cable length: 2.3 m
Speakers
Center speaker:
Output power: 50 W RMS (30% THD)
Speaker impedance: 4 ohm
Speaker drivers: 1 x 63.5 mm (2.5") full
range
Dimensions (WxHxD): 85 x 88 x 83 mm
Weight: 0.26 kg
Cable length: 1.2 m
Front/Rear speaker:
Output power: 4 x 50 W RMS (30% THD)
Speaker impedance: 4 ohm
Speaker drivers: 1 x 63.5 mm (2.5") full
range
Dimensions (WxHxD): 85 x 88 x 83 mm
Weight (front): 0.25 kg/each
Cable length: 2.2 m (front); 7.2 m (rear)
Remote control batteries
1 x AAA-R03-1.5 V
Laser
Type: Semiconductor laser GaAIAs (CD)
Wave length:
650-662 nm (DVD), 785-795 nm (CD)
Output power: 6 mW (DVD), 7 mW
(VCD/CD)
Beam divergence: 60 degrees.
20
EN

8 Troubleshooting

Warning
Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at www.
philips.com/support.
Main unit
The buttons on the home theater do not
work.
Disconnect the home theater from the
power supply for a few minutes, then
reconnect.
Picture
No picture.
Make sure that the TV is switched to the
correct source for the home theater.
No picture on a TV connected through HDMI.
Make sure that the HDMI cable is not
faulty. If it is faulty, replace it with a new
cable.
Wait for 10 seconds for auto recovery,
or change the HDMI video setting (see
'Picture and video settings' on page 16).
Disc does not play high-definition video.
Make sure that the disc contains high-
definition video.
Make sure that the TV supports high-
definition video.
Use an HDMI cable to connect to the TV.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Htd3514

Table of Contents