Table of Contents
Advertisement
HbbTV
If a TV channel offers HbbTV pages, you must first
switch on HbbTV in the TV settings to view the pages.
1 - Press , select General settings and
(right) to enter the menu.
press
2 - Select HbbTV, and press OK.
3 - Select On or Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
If you want to avoid access to HbbTV pages on a
specific channel, you can block the HbbTV pages for
this channel only.
1 - Tune to the channel of which you want to block
the HbbTV pages.
2 - Press OPTIONS and select HBB TV on this
channel and press OK.
3 - Select Off and press OK.
Factory settings
You can set the TV back to the original TV settings
(the factory settings).
To switch back to the original settings...
1 - Press , select General settings and
(right) to enter the menu.
press
2 - Select Factory settings and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
Reinstall TV
You can redo a full TV installation. The TV is
completely reinstalled.
To redo a full TV installation...
1 - Press , select General settings and
select Reinstall TV.
2 - Follow the instructions on screen. The installation
may take a few minutes.
Channel list copy
For more information, in Help, press the colour
key
Keywords and look up Channel List Copy,
copy.
CAM settings
Switch on operator profile
To switch on operator profile for CI+/CAM for easy
channel installation and updates...
1 - Press , select General settings and
(right) to enter the menu.
press
2 - Select CAM Operator profile and press OK.
3 - Select Enable and press OK
4 - Press (left) repeatedly if necessary, to close
the menu.
View CAM profile name
To display profile name of the CAM card connected...
1 - Press , select General settings and
(right) to enter the menu.
press
2 - Select CAM profile name and press OK.
3 - Press (left) repeatedly if necessary, to close
the menu.
Universal access
For more information, in Help, press the colour
key
Keywords and look up Universal access.
Child lock
Parental rating
To set a minumum age to watch rated programmes...
1 - Press , select Child
lock and press
2 - Select Parental rating, and select one of the age
in the list.
3 - Press (left) repeatedly if necessary, to close
the menu.
Set code / Change code
The Child Lock PIN code is used to lock or unlock
channels or programmes.
To set the lock code or to change the current code...
1 - Press , select Child Lock and press
to enter the menu.
2 - Select Set code or Change code and
press OK.
3 - Enter a 4 digit code of your choice. If a code is set
already, enter the current Child Lock code and then
enter the new code twice.
4 - Press (left) repeatedly if necessary, to close
the menu.
56
(right) to enter the menu.
(right)
Advertisement
Table of Contents
