Assembly - Sony E6603 User Manual

1. Charging light/Notification light
2. Front camera lens
3. Ear speaker
4. Proximity/Light sensor
5. Power key/Fingerprint sensor*
6. Volume/Zoom key
7. Camera key
8. Main microphone/Speaker
9. Charger/USB cable port
Fingerprint functionality is not available in the US market.

Assembly

Your device only supports nano SIM cards. The nano SIM card and the memory card share the
same holder but have separate slots. Make sure you don't confuse the two.
To prevent data loss, be sure to turn off your device or unmount the memory card before you
drag out the holder to remove the nano SIM card or memory card.
To Insert the Nano SIM Card
If you insert the nano SIM card while the device is powered on, the device restarts
automatically. The nano SIM card and the memory card share the same holder. If a memory
card is already inserted in the holder and the device is powered on, you must turn off the
device or unmount the memory card before removing the holder to insert the nano SIM card.
You can unmount the memory card under Settings by tapping Storage > Unmount SD card.
1
Open the cover for the nano SIM card and memory card slots.
2
Using a fingernail or other similar object, drag out the holder for the nano SIM card
and memory card.
3
Place the nano SIM card in the nano SIM card slot in the holder, and then reinsert
the holder.
4
Close the cover.
Be sure to reinsert the holder for the nano SIM card and memory card in the correct
orientation. When you drag out the holder to insert the nano SIM card, do not turn the holder
around.
This is an Internet version of this publication. © Print only for private use.
10. Strap hole
11. Main Wi-Fi/Bluetooth antenna area
12. Main camera lens
13. Camera light
14. GPS antenna area
15. Second microphone
16. Headset jack
17. Second Wi-Fi antenna area
18. Nano SIM/Memory card slot cover
19. NFC™ detection area
8