Sound Card - Gemini MDJ-900 User Manual

p l a y b a c k c o n t r o l s
NOTE: In Settings, the MIDI channels are presented in
hexadecimal. If your software defines the MIDI channel in
decimal, just add 1 (so if Settings says channel "0" is selected,
that is channel "1", and so on).
After configuring the MIDI settings on the MDJ-900,
start the DJ software:
• Select the MDJ-900 as your MIDI device*
• Select the MDJ-900 as your AUDIO device*
*Refer to DJ software's instructions
SOUN D CARD
The MDJ-900 USB audio interface has the following bit depth /
sample rate options available...
• 24-bit/192kHz
• 24-bit/96 kHz
• 24-bit/48 kHz
• 16-bit/48kHz
• 16-bit/44.1 kHz
To change these settings, press the USB source select button
(17), and then press the SETTINGS button (17). Scroll down to the
SOUND CARD entry, press the browse knob to select, turn to
select one of the available options, and press the browse knob
again to activate that setting.
NOTE: Higher bit depth and sampling rates will create
greater latency and may impact performance.
m d j - m a n u a l g e m i n s o u n d . c o m
9 0 0 •
13