Lorell 52507 Mounting Instruction

Instruction Manual

PARTS LIST

A B
Board
LLR52507 1685mm / 2 Pcs
LLR52508 885mm / 2 Pcs

SteP 1

Draw 2 parallel lines at desired height
in the same length as J rail. Keep the
distance between 2 lines at 29 5/16".

SteP 2

Align J rail under each line.
Mark the holes position of each J rail.
C
J Rails Screw
12 Pcs
8 Pcs
Manufactured in China for S.P . Richards Co., Atlanta, GA
D
Anchor
12 Pcs
8 Pcs

SteP 3

Drill 1/4" diameter hole as per marked position.
then hammer anchor into each hole.

SteP 4

Mount 2 J rails with screws.

SteP 5

Hang the board on 2 J rails.

• TIPS

A Hang lower brackets
into lower J rail. ensure
all lower brackets are
in J rail.
Glass Board Mounting Instruction
NOTICE
this installation
requires at least
two people.
Use total 12pcs screws for LLR52507
Use total 8pcs screws for LLR52508
B Push board C Lift board up
against the wall. slightly.
52507/52508
LLR52508 board can
be mounted vertical and
horizontal.
D Install upper
brackets into
upper J rail.