Roper MHE14RF Use & Care Manual page 37

TROUBLESHOOTING
T
URNTABLE
PROBLEM
The turntable will
not turn.
T
ONES
PROBLEM
You do not hear the
programming or
end-of-cycle tone.
D
ISPLAY MESSAGES
PROBLEM
The display is flashing ":".
If none of these items are causing your problem, see the "Requesting Assistance or Service" section on page 38.
CAUSE
•
The turntable is not correctly in place. It should be correct-side up and sitting
firmly on the center shaft.
•
The support is not operating correctly. Remove the turntable and restart the
oven. If the support still does not move, call an authorized service technician
for repair. Cooking without the turntable can give you poor results.
CAUSE
•
You have not entered the correct command.
•
You have turned off the tone. See the "Audible signals" section on page 15.
CAUSE
•
There has been a power interruption. Reset the clock. (See the "Setting the
clock" section on page 17.)
TROUBLESHOOTING
37