Optional Operation; Test Run Mode - LG MT06AH Instruction Manual

Optional Operation

Installer Setting -Test Run Mode
After installing the product, you must run a Test Run mode.
For details related to this operation, refer to the product manual.
If pressing button long for 3 seconds,
1
it enters into remote controller setter
setup mode.
- If pressing once shortly, it enters into
user setup mode. Please press more
than 3 seconds for sure.
- Please cancel the right and left of wind
direction for RAC product.
Function Code
Setup figure '01' blinks at the lower part
2
of indication window.
Press button to start.
3
During the test run, pressing the below
4
button will exit the test run.
- Select operation, temperature
up/down, wind flow control, wind
direction, start/stop button.
Optional Operation
Set
Installation Manual 21