Draytek Vigor2832 Series Quick Start Manual page 14

5. On the next page as shown below, please select the WAN interface (WAN 1
to WAN4) that you use. If DSL interface is used, please choose WAN1. If
Ethernet interface is used, please choose WAN2. If USB interface is used,
choose WAN3 or WAN4. Here we take WAN2 as an example. Then, click Next
for next step.
Note There are four WAN selections available for you to choose. In
which WAN3 /WAN4 is selected for 3G USB modem
connection.
6. On the next page as shown below, please select the appropriate protocol
according to the information from your ISP. For example, you should
select PPPoE mode if the ISP provides you PPPoE interface. Then click Next
for next step.
8