Advertisement
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can
severely damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform
servicing of any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor
outside this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances
occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Package contents
LCD monitor Power cord
Attaching the monitor to the stand
1. Remove the monitor from the packaging.
2. Attach the footstand to the base.
3. Turn clockwise to lock. Ensure that the base in locked onto the stand.
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin.
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's
power cord.
2. Connect the signal cable to the DVI-DL (optional) and/or
DP (optional) and/or HDMI (optional) input socket of the
monitor, and the DVI-DL (optional) and/or DP (optional)
and/or HDMI (optional) output socket of the graphics
card on the computer. Then tighten the thumbscrews on
the signal cable connector.
3. Optional: Connect the audio input socket (AUDIO IN) of
the LCD monitor and the line-out port on the computer
with the audio cable.
4. Insert the monitor power cable into the power port at
the back of the monitor.
5. Plug the power cords of your computer and your monitor
into a nearby electrical outlet.
Audio cable
DP cable
(optional)
(optional)
HDMI cable
DVI-DL cable
(optional)
(optional)
Quick start
guide
EB321HQU
EB1 Series
USER GUIDE
Advertisement
