Panasonic TX-50HX800B Ehelp page 343

No image is displayed
Check the correct input mode is selected.
●
Check the setting of
●
match the signal being output by the external equipment.
Watching > External equipment
Is Luminance Level, Backlight, Contrast,
●
Picture Menu set to the minimum?
Watching > For best picture > Basic settings
Check all required cables and connections are firmly in place.
●
Blurry or distorted image (no sound or low volume)
Reset channels.
●
Watching > Tuning and editing channels > Auto Setup
There may be a short black image
A black image is displayed to avoid picture distortion when an input signal
●
changes.
There may be white, red, blue, green and black spots on the screen
This is a characteristic of the panels and is not a problem. The panel is
●
built with very high precision technology giving you fine picture details.
Occasionally, a few non-active pixels may appear on the screen as a fixed
point of white, red, green, blue or black. Please note this does not affect
the performance of the panel.
Only for the OLED TV
A white horizontal line appears in Standby mode
A white horizontal line may appear on the screen for a while to adjust the
●
panel. This is not a malfunction.
AV (COMPONENT / VIDEO) in
- 343 -
Input Selection
Brightness or Colour
to
in the