Panasonic HC-V777 Operating Instructions Manual page 129

1
Connect this unit to a TV.
≥ Check that the plugs are inserted as far as they go.
≥ Do not use any other HDMI micro cable except the supplied one.
2
Select the video input on the TV.
≥ Example:
Select the [HDMI] channel with a HDMI micro cable.
Select the [Video 2] channel with an AV cable.
(The name of the channel may differ depending on the connected TV.)
≥ Check the input setting (input switch) and the audio input setting on the TV. (For more
information, please read the operating instructions for the TV.)
3
Change the mode to
≥ When this unit and the TV are connected with the HDMI micro cable (supplied) or an AV cable
(commercially-available) in any of the following situations, no image will be displayed on the TV.
Use the LCD monitor of this unit.
j When recording a motion picture in HDR Movie Mode or during PRE-REC
j When [HDMI RESOLUTION] is set to [576p] in HDR Movie Mode
j FULL HD Slow Motion Video Mode
WX970
series/
j
When recording a motion picture with [Backup for Twin Camera] set to [ON] or during
PRE-REC
to play back.
VX870 V770
series/
A HDMI micro cable (supplied)
≥ Be sure to connect to the HDMI
≥ Connecting with a HDMI micro
≥ Listening in 5.1 channel sound
≥ Playback using VIERA Link
B AV cable (commercially-
A/V
Picture quality
1
2 Standard images when
series
- 129 -
terminal. (Insert the connector
with the arrow side facing
down.)
cable (l 131)
(AVCHD) (l 131)
(l 132)
available)
WX970 VX870
series/
series
To play back images
recorded in 4K or high
definition picture quality,
connect this unit to the HDMI
terminal of the TV.
V770 V760
series/
High-definition images when
connecting to HDMI terminal
connecting to video terminal