Table of Contents
Advertisement
dule connection
(Depending on model)
View the encrypted (pay) services in digital TV mode.
Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can
cause damage to the TV and the PCMCIA card slot.
If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.
Euro Scart connection
(Depending on model)
Transmits the video and audio signals from an external device to the
TV set. Connect the external device and the TV set with the euro scart
cable.
Type
Current
input mode
Digital TV
Analogue TV, AV
Component
HDMI
1 TV Out : Outputs Analogue TV or Digital TV signals.
Any Euro scart cable used must be signal shielded.
When watching digital TV in 3D imaging mode, only 2D out signals
can be output through the SCART cable. (Only 3D models)
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
Network connection
(Only LAN PORT model)
Image shown may di er from your TV.
Wired network connection
Wired router
1 Press the
2 Select the NETWORK
Select the Start Connection
AV1
1
(TV Out
)
Setting your network will enable network-related features on the TV.
Digital TV
Analogue TV
Previous
The device automatically tries to connect to the network.
Network Setting
Previous
The connected network is displayed.
Select the
Internet connection
Previous
SETTINGS
on to access the main menu.
Network Setting
WORK
Move
OK
Network Setting
Network Status
AN cable to the back of TV.
Start Connection
Next
work connecting...
Cancel
Complete
ed network is connected.
For detailed settings, select [Set Expert].
Set Expert
Complete
.
Advertisement
Table of Contents
