Table of Contents
Advertisement
9
Recording and
Pause TV
9.1
Recording
What You Need
You can record a digital TV broadcast and watch it
later.
To record a TV program you need...
• a connected USB Hard Drive formatted on this TV
• digital TV channels installed on this TV
• to receive channel information for the on-screen TV
Guide
• a reliable TV clock setting. If you reset the TV clock
manually, recordings may fail.
You cannot record when you are using Pause TV.
Some digital TV operators do not allow the recording
of channels.
For more information on installing a USB Hard Drive,
in Help, press the color key
up USB Hard Drive, Installation.
Record a Program
Record Now
To record the program you are watching right now,
press
(Record) on the remote control. The
recording will start immediately.
To stop recording, press (Stop).
When TV Guide data is available, the program you are
watching will be recorded from the moment you
pressed the recording key until the program ends. If
no TV Guide data is available, the recording will only
last 30 minutes. You can adjust the end time of the
recording in the list of Recordings.
Schedule a Recording
You can schedule a recording of an upcoming
program for today or a few days from today
(maximum of 8 days away). The TV will use the data
from the TV Guide to start and end the recording.
To record a program...
1 - Press TV GUIDE.
2 - On the TV Guide, select the channel and program
you wish to record. Press (right) or (left) to
Keywords and look
scroll through the channel's programs. Use the color
key
Day to select the day you need.
3 - With the program highlighted, press the color
key
Record . The program is now scheduled for
recording. A warning will show automatically when
overlapping recordings are scheduled. If you plan to
record a program in your absence, remember to leave
the TV switched to Standby and the USB Hard Drive
switched on.
4 - The TV adds a time margin at the end of the
program. You can adjust this margin with Auto End
Margin.
5 - Press BACK to close the menu.
List of Recordings
You can view and manage your recordings in the list
of recordings. Next to the list of recordings, there is a
separate list for scheduled recordings and reminders.
To open the list of recordings...
1 - Press TV GUIDE.
2 - Press the color key
3 - In the list of recordings, select the
tabs New, Watched or Expired and press OK to
filter your view.
4 - With a recording selected in the list, you can
remove the recording with the color
key
Remove or stop an ongoing recording
with the color key
rename a recording with the color key
5 - Press BACK to close the menu.
Broadcasters can limit the number of days a recording
can be viewed. When this period expires, the
recording will be marked as expired. A recording in
the list shows the number of days before it expires.
When a scheduled recording was prevented by the
broadcaster or when the broadcast was interrupted, a
recording is marked as Failed.
Recording Conflicts
When two scheduled recordings are overlapping in
time, there is a recording conflict. To solve a recording
conflict, you can adjust the start and end time of one
or both scheduled recordings.
To adjust the start or end time of a scheduled
recording...
1 - Press TV GUIDE.
2 - Press the color key
3 - At the top of the screen,
select Scheduled and press OK.
4 - In the list of scheduled recordings and reminders,
select the tab Recordings and press OK to view
the scheduled recordings only.
5 - Select the scheduled recording that conflicts with
38
Recordings .
Stop Recording . You can
Recordings .
Rename .
Advertisement
Table of Contents
