Advertisement
5. Hood (sold separately)
The ET-54B hood cuts out unwanted light and protects the front of
the lens from rain, snow, and dust.
To attach the hood, align the hood's attachment position mark with
the red dot on the front of the lens, then turn the hood as shown
by the arrow until the lens' red dot is aligned with the hood's stop
position mark. (fig.❺)
The hood can be reverse-mounted on the lens for storage.
•
If the hood is not attached properly, vignetting (darkening of
the perimeter of the picture) may occur.
•
When attaching or detaching the hood, grasp the base of
the hood to turn it. To prevent deformation, do not grasp the
rim of the hood to turn it.
6. Filters (sold separately)
You can attach filters to the filter mounting thread on the front of
the lens.
Only one filter may be attached.
Specifications
Focal Length/Aperture
55-200mm f/4.5-6.3
Lens Construction
11 groups, 17 elements
Minimum Aperture
f/22-32
Diagonal: 27°50'-7°50'
Angle of View
Vertical: 15°40'-4°20'
Horizontal: 23°20'-6°30'
Min. Focusing Distance
1.0m/3.28ft
Max. Magnification
0.21x (at 200 mm)
Approx. 248x375-73x109 mm/
Field of View
9.76x14.76-2.87x4.29 inch
(at 1.0 m/3.28 ft.)
Filter Diameter
52 mm
Max. Diameter and Length 60.9x86.5 mm/2.40x3.41 inch
Weight
Approx. 260 g/9.2 oz
Hood
ET-54B (Sold Separately)
Lens Cap
E-52 II
Dust Cap
Lens Dust Cap EB
Case
LP816 (Sold Separately)
• Equivalent to 88-320 mm in the 35mm film format.
• The lens length is measured from the mount surface to the front
end of the lens. Add 20 mm when including the lens cap and
dust cap.
• The size and weight listed are for the lens only, except as
indicated.
• Extenders cannot be used with this lens.
• Aperture settings are specified on the camera. The camera
automatically compensates for variations in the aperture setting
when the camera is zoomed in or out.
• All data listed is measured according to Canon standards.
• Product specifications and appearance are subject to change
without notice.
0214Ni
CANON INC. 2014
©
❺
ENG-2
Advertisement
