ICB TH-RB-2 Operation Manual

Heavy duty gas hotplate

Advertisement

Quick Links

Do not store gasoline or other flammable liquids
Improper installation, adjustment, alteration, service or maintenance can cause
property damage, injury or death. Read the installation, operating and mainte-
nance instructions thoroughly before installing or servicing this equipment.
The purchaser of this equipment must post in a prominent location instructions to be followed in the
event the user smells gas. This information shall be obtained by consulting the local gas supplier.
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your ICB DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING
THIS APPLIANCE.
installation, operation or maintenance of this equipment.
FOR YOUR SAFETY
in the vicinity of this or any other appliance.
WARNING:
IMPORTANT:
Contact your ICB DEALER if you have any questions concerning
OPERATION MANUAL
HEAVY DUTY
GAS HOTPLATE
MODELS
INSTALLATION
USE & CARE
TH-RB-2
TH-RB-4
TH-RB-6
Includes

Advertisement

Table of Contents
loading

Summary of Contents for ICB TH-RB-2

  • Page 1 This manual is considered to be part of the appliance and is to be given to the OWNER or MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of this appliance. Additional manuals are available from your ICB DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING Contact your ICB DEALER if you have any questions concerning THIS APPLIANCE.
  • Page 2 18 months repair of defects without charge by an ICB World Trade factory from the date of shipment from our factory, whichever authorized service agency or one of its sub-service agen- cies.
  • Page 3 PARTS & SERVICE CUSTOMER SERVICE DATA INTRODUCTION Thank You for purchasing ICB World Trade Corp. appliance. Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life.
  • Page 4: Features & Operating Controls

    FEATURES & OPERATING CONTROLS Fig. 1 Heavy Duty Hot Plate - Features & Operating Controls...
  • Page 5: Precautions And General Information

    Do not operate this appliance if the smell of gas is present. Turn off all gas supply valves and move to a remote location to call your Authorized ICB Service Agent for service. The technical content of this manual, including any parts breakdownillustrations and/or adjustment procedures, is intended for use by qualified technical personnel only.
  • Page 6: Installation

    INSTALLATION UNPACKING & INSPECTION NOTE: DO NOT discard the carton or other packing Carefully remove the appliance from the carton. Remove all materials until you have protective plastic film, packing materials and accessories from the inspected the appliance for appliance before connecting performing any installation procedure. hidden damage and tested it Carefully read all instructions in this manual and the Installation for proper operation.
  • Page 7: Fire And Explosion Hazard

    INSTALLATION (continued) GAS APPLIANCE CODE COMPLIANCE DANGER: FIRE AND The installation of gas piping from the outlet side of the gas meter or EXPLOSION service regulator to the hotplate must be performed by a technician HAZARD qualified and certified or licensed to install gas-fired equipment. NEVER use an open flame to check for gas leaks.
  • Page 8 INSTALLATION (continued) DANGER: INSTALLING THE HOTPLATE FIRE AND Refer to the nameplate. Verify the fuel type and pressure, which must EXPLOSION match the nameplate specifications. Connecting the hotplate to the HAZARD wrong fuel type and/or pressure will compromise the safety and/or NEVER use an open flame to performance of the appliance.
  • Page 9 Drafty conditions may require a higher flame to allow the pilot to above, contact your Authorized remain lit. ICB Service Agency. ADJUST BURNER FLAME: Remove all burner control knobs, then remove the front panel. Turn an individual burner on. The right knob controls the front burner;...
  • Page 10: Operation

    If the knob will not turn by hand, do NOT attempt to force or repair it. Contact your Authorized ICB Service Agency for repairs. Forced or improperly repaired valves pose the risk of fire and/or explosion.
  • Page 11 The burner control knobs must be turned by hand only. Never use Contact your Authorized tools to turn the control knob. ICB Service Agency for The control used in this gas hotplate provides a continuous range of repairs. settings from OFF to ON.
  • Page 12: Cleaning Instructions

    CLEANING INSTRUCTIONS PREPARATION WARNING: FIRE HAZARD Turn gas shut-off valve OFF before cleaning. Allow hotplate to cool completely before cleaning. Shut off the gas supply valve before FREQUENCY cleaning. Daily TOOLS CAUTION: Bristle Brush BURN HAZARD Clean Cloth or Sponge Mild Detergent Allow hotplate to Cleaner Formulated for Stainless Steel...
  • Page 13 CLEANING INSTRUCTIONS (continued) Fig. 5 Hotplate Assembly...
  • Page 14: Troubleshooting

    Service Agency for repairs component NOTE: There are no user serviceable components in the burner assemblies or in the con- trol valves. In all cases of dam- age or malfunction, contact your Authorized ICB Service Agency for repairs.

This manual is also suitable for:

Th-rb-4Th-rb-6

Table of Contents