Advertisement
• 2.1 Channel
• Output Power: 40W RMS
• 5 Speaker Driver Configuration:
o 1.0" Tweeter x 2
o 2.5" Mid-Range x 2
o 4.0" Subwoofer x 1
• Frequency Response: 60Hz – 18kHz
• Connectivity: Bluetooth / USB / MicroSD / Aux-in
• Bluetooth Version 5.0
• Input: DC 18V, 2A
• Standby Power: <0.5W
Using the AC adapter provided, plug the smaller end into the DC Power Jack located on
the back side of the unit and plug the other end into the AC wall socket / outlet. When the
LED Status Light is red, the power is off. When the unit is on, the LED Status Light will be
blue.
NOTE: Refer to the user manual of your Bluetooth enabled device for instructions on
pairing and connecting Bluetooth devices.
1. Keep the unit and your Bluetooth enabled device within 1 metre at all times during
the pairing process.
2. Press the Power Button to turn on the unit. It will automatically enter Bluetooth
mode and the front LED Status Light will be flashing blue indicating the unit is in
pairing mode.
3. Turn on the Bluetooth function on your Bluetooth enabled device and search for
Bluetooth devices. When the search is complete, select "BTSPK62" from the
Bluetooth device list. When the Bluetooth connection is successful, you will hear a
confirmation that the unit and your device are connected.
NOTE:
• If pairing was unsuccessful, turn off the unit first and repeat the steps above to
re-pair again.
• After successful pairing, paired devices will remember each other. Unless pairing
information is deleted, re-pairing is not required after the first time.
4. Once you are successfully connected, use the controls located on the unit and or
the controls on your Bluetooth device.
5. To increase or decrease the volume, press and hold the Volume + or Volume –
Buttons.
6. To skip songs forward or backward, press the Next or Previous Buttons on the unit.
SPECIFICATIONS
POWER
BLUETOOTH MODE
Advertisement
