Troubleshooting - Geemarc RP7010 User Manual

What do I do if .....?
'00' flashes
This means the machine's using its
own OGM1 outgoing message.
If you record a new OGM1, '00' stops
flashing.
'Lo' flashes
There are no batteries or the batteries
are low.
The machine won't answer calls
Is it plugged into the telephone socket?
Is it plugged into the mains and
switched on?
Is it switched to answer calls? Press
On/Off so that the message display
('00' etc) is on.
If 'FL' is displayed, the memory's full.
The mahine keeps recording ('_'
keeps flashing) when you pick up
the phone
Press Stop. Or press and release the
hang up switch on your phone.

Troubleshooting

What do I do if .....?
See page
Your messages are announced
with the wrong time and day
Press Skip to hear the time and day
setting. If it's wrong, reset the clock.
6
Remote access problems
Are you using a phone with Tone
dialling?
4 Try to use a phone which sends a
tone for as long as you hold down
the button. Most mobile phones
7
have a 'long tone' setting.
Did you leave more than 15 seconds
4
between button presses?
Are you using the correct security
code?
8
9
Tones or announcements are heard
after playing messages
Can be normal but if troublesome,
please contact your telephone
service provider who may be able
to make an adjustment to your
8
particular telephone line.
13
See page
5
10
10
10
10
8