Hitachi CP-X2530WN User Manual page 26

3. Web Control
3.1 Projector Web Control - Alert Settings (continued)
The Alert Items are shown below.
Item
Alarm Time
SNMP Trap
Send Mail
Mail Subject
Mail Text
Click the [Apply] button to save the settings.
NOTE • The trigger of Filter Error e-mail is depending on the FILTER
MESSAGE setting in the SERVICE item of the OPTION menu which defines
the period until the filter message is displayed on the projector screen. An
e-mail will be sent when the usage time of the filter exceeds the time limit that is
set. No notification e-mail will be sent if the FILTER MESSAGE is set to TURN
OFF. ( OPTION menu in the Operating Guide)
• Lamp Time Alarm is defined as a threshold for e-mail notification (reminder)
of the lamp time. When the lamp hour exceeds this threshold that is configured
in the Web page, the e-mail will be sent out.
• Filter Time Alarm is defined as a threshold for e-mail notification (reminder)
of the filter time. When the filter hour exceeds this threshold that is configured
in the Web page, the e-mail will be sent out.
26
Configures the time to alert.
(Only Lamp Time Alarm and Filter Time Alarm.)
Click the [Enable] check box to enable SNMP Trap alerts.
Click the [Enable] check box to enable e-mail alerts.
(Except Cold Start and Authentication Failure.)
Configures the subject line of the e-mail to be sent.
The length of the subject line is up to 100 alphanumeric
characters. Using any other character may shorten the
subject line.
(Except Cold Start and Authentication Failure.)
Configures the text of the e-mail to be sent.
The length of the text is up to 1024 alphanumeric characters.
Using any other character may shorten the text.
(Except Cold Start and Authentication Failure.)
Description