Table of Contents
Advertisement
Link
Speed LED
Activity LED
10/100/1000 LAN Port
• When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
Hardware Installation
I210 Speed LED:
State
Description
Yellow On
1 Gbps data rate
Yellow Blink
Identif y 1 Gbps data
rate
Green On
100 Mbps data rate
Green Blink
Identify 100 Mbps data
rate
Off
10 Mbps data rate
Link/Activity LED:
State
Description
On
Link bet ween system and net work or no
access
Blinking Data transmission or receiving is occurring
Off
No data transmission or receiving is occurring
- 18 -
Advertisement
Table of Contents
