SERVICE AND SUPPORT ...............................20 Disclaimer of Product and Services The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this manual, from time to time, may not be correct or may be incomplete.
7. This product should only be operated from the type of power source indicated on the marking label of the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company.
The product warranty period begins on the purchase date. If the purchase date is unknown, the product All Datavideo products purchased after July 1st, warranty period begins on the thirtieth day after 2017 are qualified for a free two years extension to shipment from a Datavideo office.
Bluetooth remote controls – for more information on the remote controls please speak with your local Datavideo supplier or check our website www.datavideo.info for details. NOTE: The foam packing within this products retail carton has been designed so that it can be easily transferred to an optional hard case, called HC-600, for this kit.
The black camera snood/hood is adjustable to The Datavideo Prompter Kit, TP-650, can be used in either adapt for a wide variety of cameras. a theatre setting, or a video studio. Prepared scripts or cue ...
PROMPTER KIT FOR ENG CAMERAS TP-650 Assembly – TP-650 1. Attach/screw the tripod’s own quick release plate to the screw holes on the base of the TP-650 ENG Prompter rail, item A. The long slot will be to the rear of the camera position and the four holes in the rail will be towards the lens of the camera.
Page 8
PROMPTER KIT FOR ENG CAMERAS TP-650 Slide the Glass frame, item G, on to the front of the TP-650 ENG prompter rail, item A. Ensure the upper part of the Glass Frame, Item G, is leaning away from the camera position and secure with the two wing nut screws, item H.
Page 9
PROMPTER KIT FOR ENG CAMERAS TP-650 10. Secure the ENG tripod adapter plate (not supplied) and riser block item N (if required) to the prompter rail item A using two of the riser screws provided, items L or M. These screws go through the long slot on the riser block and prompter rail and into the base of the tripod adapter plate.
PROMPTER KIT FOR ENG CAMERAS TP-650 14. Pull the draw cord to secure the cloth Snood / Hood, item I, around the camera lens and to shut out light from the camera side. 15. Turn on the tablet being used, install and launch the DV Prompter software then prepare the prompting text to be used.
Datavideo recommend cleaning the glass regularly to remove dust and finger print marks. This will ensure the best image quality is recorded when the camera is looking through the glass.
See the following section, Optional Bluetooth Teleprompter Remote Control, which covers how to use the remote control. There is also a separate manual supplied with the remote control and can also be downloaded as a PDF document from your local Datavideo office website.
TP-650 Optional Bluetooth Teleprompter Remote Control This WR-500 remote control is designed to be used with Datavideo’s teleprompter products, DV Prompter and DVP-100. DV Prompter app is a FREE download from the Apple app store for iOS devices and also from Google Play for Android devices.
PROMPTER KIT FOR ENG CAMERAS TP-650 To switch the remote into Bluetooth pairing mode press and hold the centre Play / Pause button for 3 to 4 seconds. GREEN LED will now blink on / off repeatedly to indicate it is ready to pair with a Bluetooth device. Once paired a Bluetooth icon will be shown in the top right hand corner of the main app screen and bottom right corner of the script.
PROMPTER KIT FOR ENG CAMERAS TP-650 Control Buttons Whilst Whilst Button scrolling text text paused Speed up text scroll Next Break Marker Slow down text scroll Previous Break Marker Pause text Play text Reduce font size Load previous script Increase font size Load next script LED Indicators RED LED...
PROMPTER KIT FOR ENG CAMERAS TP-650 CR2032 Battery A CR2032 button battery is installed inside this remote. The original battery supplied (when new) is expected to last for 3 years under average / normal use. This button battery can be replaced by the user when it dies. Please remove the back case cover carefully to avoid user damage to the PCB or case.
PROMPTER KIT FOR ENG CAMERAS TP-650 Optional HC-600 Hard Case The foam packaging of the TP-650 kit has been designed so that customers who buy the optional hard case can simply lift the foam out from the retail carton and insert it directly into the optional HC-600 hard case. As standard, the HC-600 hard case is supplied with the usual diced, pick &...
PROMPTER KIT FOR ENG CAMERAS TP-650 Adjustable tablet holder rail – Item B Item B in this kit has two counter sunk hex head screws. If these screws are removed the horizontal rail can be moved and re-secured to the vertical block using different holes. This will change position of the tablet holder and where the text is reflected on the 60/40 Mirror glass.
Page 19
PROMPTER KIT FOR ENG CAMERAS TP-650 NOTES...