Bosch WAN242C2SN User Manual page 48

Hide thumbs Also See for WAN242C2SN:
Table of Contents

Advertisement

en Troubleshooting
Fault
The programme does
not start.
The door cannot
be opened.
The water is not drain-
ing.
48
Cause and troubleshooting
→ "Deactivating the childproof lock", Page 37
⁠ is activated.
Check whether
→ "Buttons", Page 22
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press
⁠ to start the programme.
4.
– –– is activated.
Continue the programme by selecting Spin or
Drain and pressing
→ "Resuming the programme when the programme
status is Rinse Hold", Page 36
The temperature is too high.
Wait until the temperature has dropped.
→ "Cancelling the programme", Page 36
Water level is too high.
Start the Drain programme.
Power failure.
Open the door using the emergency release.
→ "Emergency release", Page 54
Drain pipe or water outlet hose is blocked.
Clean the drain pipe and the water outlet hose.
Drain pipe or water drain hose is caught or jammed.
Ensure that the drain pipe and water drain hose are
not kinked or trapped.
Drain pump is blocked.
→ "Cleaning the drain pump", Page 41
– –– is activated.
Continue the programme by selecting Spin or
Drain and pressing
→ "Resuming the programme when the programme
status is Rinse Hold", Page 36
The water outlet hose is connected too high.
Install the water outlet hose at a maximum height of
1 metre.
Detergent dosage is too high.
⁠ is activated.
⁠ .
⁠ .

Advertisement

Table of Contents
loading

Table of Contents