Advertisement
4.12 TIME TO END
Option selection
1.
To select options "time to end",press the "Option selection" button, pressing repeatedly the "Confirm op-
tion" button options you can select when the wash cycle ends.. The time to end of cycle function calcu-
lates the initial duration of the washing/drying cycle, the settings made (temperature, spin speed and op-
tions) which may shorten or lengthen the cycle's initial duration, and the delay time the user wishes to
add before the cycle starts.
2.
After the time to end has been set, the symbol on the display remains on.
3.
To clear the "time to end" function, you must select the option by pressing the button by "option selection"
and press the "Confirm option" button until the display shows 0..
4.
The Start Pause symbol flashes on and off until the cycle starts. After the cycle starts, the symbol re-
mains constantly lit.
4.13 STARTING THE WASHING PROGRAMME
1.
To start the washing programme after making your personal settings, press the Start Pause button.
2.
Once the cycle has started, the display shows the time remaining before the end of the cycle and the
Start Pause symbol on the display is constantly on.
3.
During performance of the washing programme, the symbols which identify the various phases light up:
Cycle phase symbols: Prewash, wash, rinse and final spin.
Option Time to end
Confirm option
EN
Time to end
symbol
Start pause
symbol
Start Pause
14
Advertisement
