Updating The Tv Firmware - LG 47LA690S.AEE Quick Setup Manual

6
SMART → Settings → SUPPORT → Software Update
REC
Uses Software Update to check and obtain the latest version. If not updated, certain functions may not work
properly. It is also possible to check manually for available updates.
Software Update
Automatic update mode If an update is available, the update automatically starts without prompting.
Check Update Version
NOTE
y When the update starts, the update progress window appears for a short time and disappears.
y The latest version can be obtained via the digital broadcast signal or an internet connection.
y Changing the programme while downloading the software via a digital broadcast signal interrupts the
download process. Returning to the initial programme allows downloading to resume.
y If software is not updated, certain functions may not work properly.
y [For Finland/Sweden/Denmark/Norway models.]
If the software update is performed via the broadcasting signal, you will be prompted to continue the update
regardless of whether the Automatic update mode is enabled or not.
Tag On is a data transmission technology that can be used on smartphones with NFC (Near
Field Communication).
Simply by tapping your smartphone to a Tag On sticker, you can share content between
your smartphone and TV.
To connect your smartphone to the TV using Tag On, they must be connected on the
same Wi-Fi network or Miracast™/Intel's WiDi of the smart TV is set to On.
Tag On
SMART → Settings → NETWORK → Wi-Fi Direct
REC
The Wi-Fi Direct function supports wireless connection technology. With SmartShare
screens of devices connected to Wi-Fi Direct.
Wi-Fi Direct
On
Wi-Fi Direct
a
[TAAAA]
Do you want to request a connection?
Device Name
Connection
Connection

TAAAA Automatically connect without asking
BBBB
Yes
*If you are not using Wi-Fi Direct to minimize the interference between Wi-Fi devices, it is recommended to set Wi-
Fi Direct( a ) to Off. You can only use devices that support Wi-Fi Direct.

Updating the TV Firmware

Set it to On.
If an update is available, a prompt will appear to perform the update.
Checks the latest update version installed. When a new update is available, the
download process can be performed manually.
Tag On
Wi-Fi Direct Setting
1 If Wi-Fi Direct is set to On, a list of available devices
appears.
» To use Wi-Fi Direct, go to
set Wi-Fi Direct(
2 When you are prompted to request connection, select Yes.
No
Wi-Fi Direct is now connected to your TV.
TM
, you can share files or
Settings → NETWORK and
a
) to On.