Navigating; Characters - Berger & Schroter 31484 User Manual

Note:
The remote will not work properly without the
antenna attached.
When power on the camera, allow approxi-
mately 10-20 seconds for the camera to ac-
quire a signal. The remote will not function
properly until the camera has acquired a si-
gnal.You can determine that the camera has
acquired a signal by locating the signal icon
on the LCD screen.

1.3.1 Navigating

Press UP or DOWN to select or highlight the menu item. Press LEFT or
RIGHT to select the option of each item and press OK to make a selec-
tion.
Display menus /Exit
(MENU)
Select option (LEFT)

1.3.2 Characters

When entering digits, letters or
punctuations into an input column,
there are some useful characters
that can be used by pressing the
button continuously:
Select item (UP)
Increase value
Select item (down)
Decrase value
: 1 . / : @ _
Press the punctuation "*" for
25
Abb. 3 Place the remote
control in the camera
Make
selection (OK)
Select option
(right)
: 0 + -
laser pointer.