LG GCB22FTMPL Owner's Manual page 35

Symptoms
Did you open and
close the appliance
door frequently or is
the appliance door
Frost or condensation
improperly closed?
has formed inside or
outside the appliance.
Is the installation
environment humid?
Is the appliance
installed on a weak
floor or improperly
leveled?
Does the rear of the
The appliance is
appliance touch the
noisy and generates
wall?
abnormal sounds.
Are objects scattered
behind the appliance?
Is there an object on
top of the appliance?
There are anti
condensation pipes
fitted to these areas of
The side or front of the
the appliance to reduce
appliance is warm.
condensation forming
from around the door
area.
Is there water leakage
around the appliance?
There is water inside
or outside of the
Is there water on
appliance.
the bottom of the
appliance?
Reason
• Frost or condensation can form if the outside air
penetrates inside the appliance.
• Condensation can appear on the exterior of the
appliance if the installation area is too humid or
on a humid day such as a rainy day. Wipe off any
moisture with a dry cloth.
• Install the appliance on a solid and flat area.
• Adjust the installation position to allow enough
clearance around the appliance.
• Remove the scattered objects from behind the
appliance.
• Remove the object on top of the appliance.
• The heat releasing pipe to prevent condensation
is installed on the front and side of the appliance.
You may feel it particularly hot right after the
appliance is installed or during the summer. You
can be assured that this is not a problem and is
quite normal.
• Check if the water has leaked from a sink or
another place.
• Check if the water is from the thawed frozen food
or a broken or dropped container.
Solution
EN
35