First-Time Bluetooth® Connection Setup; Bluetooth® Setup With Forced Pairing - Philips SA2410BT User Manual

Table of Contents

Advertisement

5
Follow the on-screen instructions to
complete the installation of the Philips
Device Manager from the Internet.
First-time Bluetooth®
connection setup
The LUXE is set up and ready to connect
to the first Bluetooth® discoverable and
Bluetooth® enabled mobile phone within
range.
1
Press and hold
seconds to turn on the LUXE.
The power LED flashes once to
»
indicate that the LUXE is turned on.
The Bluetooth® LED flashes rapidly to
»
indicate the pairing mode.
On your mobile phone, enter 0000
»
as the pass code for the LUXE, if
required.
The LUXE connects to the first
»
Bluetooth® discoverable and
Bluetooth® enabled mobile phone
that is within range.
The Bluetooth® connection was successful...
The Bluetooth® LED flashes once
»
every 5 seconds to indicate that the
Bluetooth® connection is successfully
established.
»
You can accept or reject all your
incoming mobile phone calls with the
LUXE.
EN
12
/
for approximately 4
Once the connection is established, the
LUXE automatically reconnects to your
mobile phone every time you switch
on the LUXE. (This requires that the
automatic reconnection feature is
enabled on your phone.)
The Bluetooth® connection failed...
The display shows a crossed out
»
Bluetooth® icon.
1
Follow the steps for a Bluetooth® setup
with forced pairing (see 'Bluetooth® setup
with forced pairing' on page 12) until the
pairing is successful.
Note
The Bluetooth® connection requires a distance of less
than 10 meters between the LUXE and your mobile
phone.
To save battery power, the LUXE discontinues
unsuccessful Bluetooth™ connection attempts after
10 minutes.
Bluetooth® setup with forced pairing
The following forced pairing method can be
used in the event that the automatic connection
fails:
1
Turn on your mobile phone.
2
Enable the Bluetooth® feature on your
mobile phone.
3
Set your mobile phone Bluetooth® feature
to discoverable.
4
Ensure that the LUXE is turned off when
you start.
5
On the LUXE, press and hold
approximately 4 seconds.
/
for

Advertisement

Table of Contents
loading

Table of Contents