Canon EOS Rebel T6i W Instruction Manual page 321

Before using the printer, make sure it has a PictBridge connection port.

Movies cannot be printed.

The camera cannot be used with printers compatible only with CP Direct

or Bubble Jet Direct.
Do not use any interface cable other than the one provided.

If there is a long beeping sound in step 5, it indicates a problem with the

printer. Resolve the problem displayed in the error message (p.328).
If any of the following shooting modes or functions is set, the camera

cannot be connected to a printer. Cancel all the relevant settings, then
reconnect the camera to the printer with an interface cable.
• <F> or <G> in <8> mode
• Multi Shot Noise Reduction
• [51: Wi-Fi/NFC] set to [Enable]
You can also print RAW images taken with this camera.

When you use a battery to power the camera, make sure it is fully

charged. With a fully-charged battery pack, you can print for approx. 2 hr.
Before disconnecting the cable, first turn off the camera and printer. Hold

the plug (not the cord) to pull out the cable.
For direct printing, using the DC Coupler DR-E18 (sold separately) and

AC Adapter AC-E6N (sold separately) to power the camera is
recommended.
Play back the image.
6
Press the <


The image will appear with the <w>
icon on the upper left of the screen to
indicate that the camera is connected
to a printer.
Preparing to Print
> button.
x
321