Digital Colour TV
Operating Instructions
Instruction Manual
Additional Information

   Also See for Sony Bravia KDL-22BX20D

   Summary of Contents for Sony Bravia KDL-22BX20D

  • Page 1

    Digital Colour TV Operating Instructions KDL-22BX20D 4-193-042-12 Start-up Guide Instruction Manual Additional Information...

  • Page 2: Trademark Information

    Please refer to the illustration that actually equipped with the product. Introduction Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. Notice for Digital TV function •...

  • Page 3: Table Of Contents

    Table of Contents Start-up Guide Safety Information ...7 Precautions ...8 Notes about the discs ...9 Overview of the remote ...10 Overview of the TV buttons and indicators ...13 Watching TV Watching TV ...14 Using the Digital Electronic Programme Guide (EPG) Using the Digital Favourite List Playing a DVD Getting ready ...18...

  • Page 4: Start-up Guide

    Start-up Guide 1: Checking the accessories Mains lead (1) Remote RM-ED038 (1) Table-top stand (1) Size AA batteries (R6 type) (2) To insert batteries into the remote Push and lift the tab to open the cover. • Observe the correct polarity when inserting batteries. • Do not use different types of batteries together or mix old and new batteries.

  • Page 5

    Connecting a satellite receiver/ recorder (e.g. DVD recorder) with SCART Coaxial cable Scart cable VCR/ DVD Recorder Connecting a satellite receiver/ recorder (e.g. DVD recorder) with HDMI Coaxial cable HDMI cable VCR/ DVD Recorder 4: Initial settings Coaxial cable Coaxial cable...

  • Page 6

    Connect the TV to your mains socket. Press on the TV. When you turn on the TV for the first time, the Installation Guide menu appears on the screen. Press to select the language. Your language selection appears on the screen.

  • Page 7: Safety Information

    - Do not cover the TV set with items such as curtains or newspapers, etc. - Do not install the TV set as shown below. Air circulation is blocked. Wall Wall Mains lead Handle the mains lead and socket as follows in order to avoid any risk of fire, electrical shock or damage and/ or injuries: - Use only mains leads supplied by Sony, not other suppliers. - Insert the plug fully into the mains socket. - Operate the TV set on a 220–240 V ˜ 50-60 Hz supply only. - When wiring cables, be sure to unplug the mains lead for your safety and take care not to catch your feet on the cables. - Disconnect the mains lead from the mains socket before working on or moving the TV set. - Keep the mains lead away from heat sources. - Unplug the mains plug and clean it regularly. If the plug is covered...

  • Page 8: Precautions

    If the following problems occur... Turn off the TV set and unplug the mains lead immediately if any of the following problems occur. Ask your dealer or Sony service centre to have it checked by qualified service personnel. When: - Mains lead is damaged. - Poor fitting of mains socket. - TV set is damaged by being dropped, hit or having something thrown at it. - Any liquid or solid object falls through openings in the cabinet. Precautions Viewing the TV • View the TV in moderate light, as viewing the TV in poor light or for a long period of time strains your eyes. • When using headphones, adjust the volume so as to avoid excessive levels, as hearing damage may result. LCD Screen • Although the LCD screen is made with high-precision technology and 99.99% or more of the pixels are...

  • Page 9: Dvd Player

    Safety information about built-in DVD player • The use of optical instruments with this product will increase eye hazard. As the laser beam used in this built-in DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. This appliance is classified as a CLASS 1 LASER product. • To keep the disc clean, handle the disc by its edge. Do not touch the surface. Dust, fingerprints, or scratches on the disc may cause it to malfunction. • Do not use the following discs. – A lens cleaning disc. – A disc that has a nonstandard shape(e.g., card, heart). – A disc with a label or sticker on it. – A disc that has cellophane tape or sticker adhesive on it. • Do not resurface the playing side of a disc to remove surface scratches. • When ejecting a disc from the built-in DVD player by pressing on the TV, be sure to take out the disc from the disc slot. Do not leave the disc in the disc slot.

  • Page 10: Overview Of The Remote

    Overview of the remote - TV standby Turns the TV on and off from standby mode. TOP MENU DVD Mode: Opens the track menu* of DVD while playing. (page 18) AUDIO In Analogue Mode: Changes the dual sound mode (page 29). In Digital Mode: Changes the audio language for the current programme you are watching (page 33).

  • Page 11

    qs P - (Previous channel) / REPEAT In TV Mode: Returns to the previous channel watched. In DVD Mode: Selects the repeat functions (page In Teletext Mode: Displays the subpages. qd % - Mute Turns on or off the sound temporarily. qf 2 +/- Volume Increases (+) or decreases (-) the volume.

  • Page 12

    w; x In DVD Mode: Stops all operations. wa u In DVD Mode: Starts playing. Freezes the scene for DVD or video data. Pauses the audio data. ws M In DVD Mode: Changes the speed of forward picture search mode while playing. wd m In DVD Mode: Changes the speed of backward picture search mode while playing.

  • Page 13: Overview Of The Tv Buttons And Indicators

    Overview of the TV buttons and indicators + / PROG + Increases the volume / selects the next channel. / PROG In TV Mode: Switches between volume / channel selection options. In DVD Mode: To eject the disc, press this button until eject message appears.

  • Page 14: Watching Tv

    Watching TV Watching TV on the TV or I/ Press remote to turn on the TV. Standby indicator on the front panel of the TV changes to green from red. Press to switch to digital or analogue mode. Input source menu appears on the display.

  • Page 15

    To access Teletext In analogue mode, press . Each time you press , the display changes cyclically as follows: Picture and Teletext Teletext No Teletext (Exit the Teletext service). • Press number buttons or • Press to hold a page. • Press to reveal hidden information on a page. • If there are subpages under a page and if you do not want to wait for auto scrolling, press for previous pages and button for following pages. • When four coloured items appear at the bottom of the Text page, Fastext is available. Fastext allows you to access pages quickly and easily. Press the corresponding coloured button to access the page. To change the screen format manually In TV Mode: Press repeatedly to select the desired screen format.

  • Page 16: Using The Digital Electronic Programme Guide (epg)

    Using the Digital Electronic Programme Guide (EPG) Service Type DTV Basil Brush(Now) 27 Feb 2009 1 BBC ONE 11:00 Basil Brush 2 BBC TOW 11:30 Secret Agent 3 ITV 1 12:15 Trisha 13:00 Deal or no Deal 4 five 5 Channel 4 13:25 International Blows 6 BBC THREE 14:00 Carry On Up The Khyber...

  • Page 17: Using The Digital Favourite List

    Using the Digital Favourite List Programme Table Prog Service Name FAV1 BBC ONE BBC TOW ITV 1 five Channel 4 BBC THREE BBC FOUR TV 3 NRK2 Service Type ALL TYPE Network Network Move Delete Tune Select Page Up/Down This function may not be available in some countries/ ...

  • Page 18: Getting Ready, Playing A Dvd

    Playing a DVD Getting ready Press on the TV or I/ remote to turn on the TV. Standby indicator on the front panel of the TV changes to green from red. Press to select the DVD mode. Input source menu appears on the display. Press to select the DVD, then press...

  • Page 19: Slow Motion

    Selecting a track or chapter through the Info menu This function depends on the DVD in use. Press and hold to display the information bar during playback. Press to select the track or chapter. Press number buttons to enter the two digit track or chapter.

  • Page 20: S-vcd/vcd Playback

    Keep pressing to select the subtitle language.  • Press repeatedly until Subtitle Off appears on the screen to turn the subtitles off. • Switching between subtitle languages may be prevented by the DVD's own structure. In this case, you can generally make the setting from the DVD menu. Camera angle selection for certain scenes and passages Some DVDs contain scenes or passages shot many times from different camera angles. You can select one of these different angles.

  • Page 21: Playing Sound/picture Data

    Playing Sound/Picture Data Playing Picture CD In most cases, playback starts automatically with the first picture as soon as the data are read. When the file browser appears, press to select the directory, then press to open it. Subdirectory list appears on the screen.

  • Page 22: Connecting Optional Equipment

    Using Optional Equipment Connecting optional equipment You can connect a wide range of optional equipment to your TV. Connection cables are not supplied. DVD Player / Recorder Video game console Decoder DVD Player PC (HDMI output) Blu-ray DVD player Digital video camera Video game console / Digital video camera PC / DVD player Component output CAM card Digital camera/ USB device Headphone...

  • Page 23: Connecting Other Equipment

    Connect with CAM Module (Conditional Access Module) Headphone Headphones Description This is the input for digital video and audio signals. If the equipment has a DVI socket, connect the DVI socket to the HDMI IN socket through a DVI-HDMI adaptor interface (not supplied), and connect the equipment’s audio out sockets to the PC/Y Pb Pr/HDMI Audio IN socket.  • HDMI input only supports the following video inputs: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 1080/24p • Use only a genuine HDMI cable bearing the HDMI logo. We recommend that you use a Sony HDMI cable (high-speed type). Connect your equipment through a VGA-Y Pb Pr adapter cable (not supplied) and connect the equipment’s audio out sockets to PC/Y Pb Pr/HDMI Audio IN socket. It is recommended to use a PC cable with ferrites, such as the “Connector, D-sub 15” (ref. 1-793-504-11, available in Sony Service Center), or an equivalent.  • Y Pb Pr input only supports the following video inputs: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p. You can connect a decoder. When you connect a decoder, scrambled broadcast signals are transmitted to the decoder where they are decoded and send to the television.  • You can connect a recorder (e.g. DVD recorder) directly to the TV. Description You can enjoy photo/music files stored in a Sony digital still camera or camcorder through a USB cable or USB storage media on your TV (page 24).

  • Page 24: Viewing Pictures From Connected Equipment, Playing Back Photo/music Via Usb

    Playing Back Photo/ Music via USB You can enjoy photo/music files stored in a Sony digital still camera or camcorder through a USB cable or USB storage media on your TV. Connect a supported USB device to the USB socket of the TV.

  • Page 25: Using Control For Hdmi

    90°. Press to rotate a photo by 90° during playback. Using Control for HDMI Control for HDMI function allows the equipment to control each other through the HDMI CEC (Consumer Electronics Control) feature defined by HDMI. You can connect together the Sony HDMI compatible devices such as a TV and a DVD recorder with hard disk and audio system through HDMI cables to allow them control each other. Make sure that the compatible equipment is connected properly in order to use the Control for HDMI function. to select To connect the equipment compatible to confirm. with Control for HDMI Connect the compatible equipment and the TV through an HDMI cable. For details, see page 23.

  • Page 26: Navigating Through Menus

    Using MENU functions Navigating through menus MENU allows you to access and enjoy various convenient features of this TV. You can easily select channels and change the settings for your TV. Press MENU to display the menu. MENU Photo Photo Music Settings Exit...

  • Page 27: Tv Settings Menu

    TV Settings Menu Picture Picture Mode Brightness Contrast Colour Sharpness Advanced Picture Settings Select Picture Selects the picture mode. Picture Mode Vivid Natural Movie Sports User Brightens/darkens the picture. Brightness Increases/decreases picture contrast. Contrast Increases/decreases colour intensity. Colour Sharpens/softens the picture. Sharpness Adjusts the advanced picture settings. Advanced Picture Settings Colour Temperature Perform the following operations to open the TV Settings menu. Vivid Press MENU.

  • Page 28

    Mpeg NR Vibrant Colour Perfect Clear Dynamic Contrast Dynamic Backlight Backlight Reduces the picture noise (snowy picture). Modifies the effect of the noise Low / Medium reduction. / High Turns off the Noise Reduction feature. Reduces the picture noise in MPEG-compressed video. This feature is activated while watching a DVD or a digital broadcast. Modifies the effect of the MPEG Low / Medium noise reduction. / High Turns off the MPEG Noise Reduction feature. Makes colours more vivid. Modifies the effect of the vibrant Low / Medium colour. / High Turns off the vibrant colour feature.

  • Page 29: Auto Volume, Sound Mode, Clear Voice, Audio Description, Channel Setup, Auto Tuning, Digital Manual Tuning

    Sound Press Volume Adjusts the sound balance between right and left speakers. Balance Volume levels of the broadcasters are different from each other. This may result Auto Volume in volume differences between channels. If this feature is set as "On", volume level is maintained when you change the channels. Adjusts the sound of the speakers for a stereo or bilingual broadcast. Sound Type Stereo Dual I / II Gives depth to the sound of the programme you are watching. Surround Adjusts the sound effect depending on the features of the programme you are Sound Mode watching. Music Clear Voice Flat Adjusts the sound of a headphone connected to the TV. Headphone Provides audio description (narration) of visual information if the terrestrial Audio Description digital broadcast contains audio description feature.  • Audio Description option is only active in digital broadcasts. Channel Setup Tunes in all available channels. Auto Tuning You can retune the TV after moving house, or to search for new channels that have been launched by broadcasters.

  • Page 30

    Repeat the above procedure to tune other channels. Tunes and stores the analogue channels manually. Analogue Manual Tuning System / Current Channel / Search / Programme number Fine Tuning Skip Confirm You can sort the channels tuned in TV according to your personal preferences, Programme Table delete channels, lock any channel you want or rename the analogue channels. P ress number buttons or to select the channel number that you want to tune. W hen the TV finds available channels, channel names are displayed on the lower part of the menu and channels are stored. P ress MENU to finish setting up. P ress to select "Programme no", then press or number buttons to select the programme number to which the tuned channel will be stored. P ress to select "System", then press your selection. BG: For Western Europe countries/regions I: For England DK: For Eastern Europe countries/regions...

  • Page 31

    Service Type Move Delete Name Skip Provides information about Channel, Network, Modulation, signal quality and Signal Information signal strength (in digital mode only). Allows you to perform the settings for the CA - Module that you can insert to CA - Module your TV. When a CI-module is inserted for a channel that makes scrambled broadcast in CI standards, this feature opens a submenu and allows you perform the information updates about the module. Press blue button repeatedly to select the service type. The service type you selected appears in the menu. ALL TYPE: Displays all channels. DTV: Displays digital channels only. ATV: Displays analogue channels only. RADIO: Displays radio channels only. DATA: Displays data channels only. Programme Table menu displays only the channels that are in convenience with the selected service type. Changes the position of a stored channel. P ress to select the channel you want to move. P ress green button. P ress the number buttons to enter the new position, then press to confirm. Channel will be moved to its new position. P ress RETURN to finish setting up.

  • Page 32: Auto Adjust, Horizontal Position, Vertical Position, Off Time

    PC Setup (for PC input) The most suitable geometric settings in accordance with the entry mode are Auto Adjust configured by this function. Moves the screen to the left or to the right. Horizontal Position Moves the screen up or down. Vertical Position This is the pixel clock frequency. You can narrow down or enlarge the display Size by selecting a desired value Using Phase consolidated on the PC image. Automatically adjusts the display position, and phase of the picture in PC Auto Adjust Mode mode. Timer Allows you to set the clock manually. When the TV receives digital channel Clock broadcasts, you cannot set the clock manually since the time code is obtained automatically from the broadcast signal. TV switches to the standby mode automatically at the specified times and Off Time dates. Repeat / Hour / Minute TV turns on from the standby mode automatically at the specified times and On Time dates.

  • Page 33: Language Settings, Audio Languages, Subtitle Languages, Hard Of Hearing

    Allows the TV to switch itself into the standby mode automatically after the Sleep Timer specified time, which can be set between 10 and 240 minutes, has elapsed. When this function is set to "On", TV will switch itself into Standby mode after Auto Sleep 5 minutes if it does not receive any signal from any of the input sources. Allows you to manually select the time zone you are in, if it is not the same as Time Zone the default time zone setting for your country/region. Options Allows you to make all language settings. Language Settings Language Settings Audio Languages Subtitle Languages Hard of Hearing Returns all settings to factory settings and the Installation Guide is displayed. Restore Factory Defaults  • Do not turn off the TV, unplug it or press any button while restoring the factory settings (approximately 30 seconds). • Favourite lists, country/region, language and all settings about the auto-tuned channels will be reset to the factory settings. "Country" option is grayed out and can not be modified. The country that was Country selected during the initial start-up will automatically be displayed in the menu. Game Mode is only active for PC, HDMI, YPBPR input sources. When the Game Mode Game Mode is set to "On" for these input sources, picture mode in picture menu will automatically be switched to the Game mode. You can only modify the...

  • Page 34: Parental Control

    Allows your TV receive software updates (when they are broadcast) through RF Software update manual software scan if the Software Update function is "Off". Allows to make software update through USB input. USB Software update This function allows the TV to communicate with equipment connected to HDMI Set-up HDMI socket, through Control for HDMI.  • This menu appears under “Preference” menu when the input source is set to HDMI. Control for HDMI Auto Devices Off Auto TV on Device List Update HDMI Device List Allows you to view and record the scrambled channel when using a decoder Decoder Settings connected directly to scart connector AV1 via a recorder. (for AV1) Parental Control When this function is set to "On", a password will be prompted when a user wants Lock System to enter the Auto tuning, Digital Manual Tuning, Analogue Manual Tuning and Programme Table menus under the Channel Setup menu.

  • Page 35: Dvd Settings Menu

    Allows you to prevent watching the desired programmes. Enter the correct PIN code Block to watch the blocked programmes. Programme P ress P ress P ress green button. R epeat the above procedure to block other channels. P ress RETURN Sets an age restriction for programmes. To watch a programme rated above the age Parental you have specified, enter the correct PIN code. Guidance P ress P ress RETURN If you set the Panel Lock to "On", control buttons on the TV will be locked and Panel Lock become non-functional. DVD Settings Menu Video Language – – Video setup page – – TV Display Video Adjusts the screen format of the TV.

  • Page 36

    Preference When this function is activated, current camera perspective and all camera Angle Mark angles appear on the screen.  • Some DVDs do not contain this function. All settings made in the DVD mode are restored to the factory settings. Default When this function is activated, DVD player returns to the last playback point Last Memory and resumes playback. Films on DVDs may completely or partly not be suitable for children. Parental Such DVDs may contain information that marks the content or scenes with access levels between 1 and 8. You can select one of the access levels and allow alternative scenes to be used during playback. You can change the parental password as desired. Password When this function is activated, low volumes will be increased without causing an increase in high volumes. P ress "Angle Mark", then press P ress to select "On", then press P ress SET UP to exit the menu. P ress to select "Default", then press S elect "Reset", then press to confirm. M enu will be closed and settings will be reset. P ress to select "Last Memory", then press P ress to select "On", then press...

  • Page 37: Installing The Accessories (wall-mount Bracket)

    Additional Information Installing the Accessories (Wall-Mount Bracket) To Customers: For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by licensed contractors. Do not attempt to install it yourself. To Sony Dealers and Contractors: Provide full attention to safety during the installation, periodic maintenance and examination of this product. Your TV can be installed using a Wall-mount bracket VESA compliant with 75x75mm fixings Wall mount bracket is not supplied with TV set. Steps: P lace on the Table as shown below, protection screen with Protection bag, when securing the Wall Mount D etach Stand from TV set ( refer page 6)

  • Page 38: Specifications

    Specifications Model name System Panel System TV System Colour/Video System Channel Coverage Disc formats Media formats Sound Output Input/Output jacks Aerial / Cable / AV1 / Y Pb Pr IN Y Pb Pr IN HDMI IN PC AV2 AV2 KDL-22BX20D LCD (Liquid Crystal Display) Panel Analogue: Depending on your country/region selection: B/G, D/K, I, L Digital: DVB-T Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input) Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4 Analogue: VHF:E2-12 / UHF: E21-E69 / CATV:S1-S20 / HYPER: S21-S41 / D/K: R1-R12, R21-R69 / L: F2-F10,B-Q, F21-F69 / I: UHF B21-B69 Digital: VHF / UHF DVD+RW, DVD+R, DVD-RW, DVD-R, CD-RW, CD-R DVD video, audio CD, video CD (VCD 1.0/1.1/2.0), S-Video CD 3+3 W 75 ohm external terminal for VHF / UHF 21-pin scart connector including audio / video input, S-Video input, RGB input and TV audio/video output. Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i Y: 1 Vp-p, 75 ohm, 0.3V negative sync. / Pb/Cb: 0.7 Vp-p, 75 ohm / Pr/Cr: 0.7 Vp-p, 75 ohm Audio input (mini jack) Supported formats: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i...

  • Page 39

    Power and others Power Requirements Screen Size (measured diagonally) Display Resolution Power Consumption Power Consumption (DVD Mode) Standby Power Consumption Avarage anual energy Consumption Dimensions (with stand) (W x H x D) (without stand) Mass (with stand) (Approx.) (without stand) Supplied Accessories Design and specifications are subject to change without notice. 4 hours a day and 365 days a year. PC Input Signal Reference Chart for PC and HDMI IN Resolution Signals Horizontal Pixel SVGA 1024 1024 1024 WXGA 1280 1280...

  • Page 40: Troubleshooting

    Troubleshooting Picture No picture (screen is dark) and no sound • Check the aerial/cable connections. • Connect the TV to the mains, and press 1 on the side of the TV. • If the (standby) indicator lights up in red, press I/1. No picture or no menu information from equipment connected to the scart connector • Press to display the connected equipment list, then select the desired input. • Check the connection between the optional equipment and the TV. Double images or ghosting • Check the aerial/cable connections.

  • Page 41

    Television in the UK is going digital, bringing us all more choice and new services. Starting in late 2007 and ending in 2012, television services in the UK will go completely digital, TV region by TV region. Please see overleaf to find out when your area switches to digital. Digital UK is the independent, non-profit organisation leading the process of digital TV switchover in the UK.

  • Page 42

    If you are missing any channels, it may be that they are not available in your area, or that your aerial needs upgrading. If you have any questions, please contact Sony on 08705 111 999 or call Digital UK on 0845 6 50 50 50 or visit select “DTV” then press...

  • Page 43

    Useful information for Sony products. © 2010 Sony Corporation 4193042 4-193-042-12...

Comments to this Manuals

Symbols: 0
Latest comments: