Table of Contents
Advertisement
•
Aspect Control: adjusts the aspect ratio to full, 4:3, 1:1 or OverScan.
4:3 is only available when input source is in 4:3 format. OverScan is only
available for the HDMI input source.
•
ASCR: turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
•
Position: adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
•
Focus: reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
•
AUTO Adjust: Automatically adjusts the image to its optimized position,
clock, and phase.
•
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
•
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
4.
Input Select
In this function, you can select your desired input source.
5.
System Setup
Allows you to adjust the system.
3-4
Chapter 3: OSD (On-Screen Display) menu
Advertisement
Table of Contents
