Troubleshooting; Diagnosing Problems - LG SIGNATURE T2402SGPW Owner's Manual

Mini washer
Table of Contents

Advertisement

TROUBLESHOOTING

The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems
at an early stage. If the appliance does not function properly or does not function at all, check the
following before you call for service:

Diagnosing Problems

Symptoms
Power failure, or the power
cord was pulled out during
washing.
The drawer does
not open.
Baby Care or Tub Clean
programmes were operated.
Draining starts
when pressing
The Start/Pause button is
Start/ Pause
pressed during washing.
button.
Foreign objects, such as
Rattling and
keys, coins, or safety pins
clanking noise
may be in drum.
Heavy wash loads may
produce a thumping sound.
Thumping sound
Wash load may be out of
balance.
Packaging materials were not
removed.
Wash load may be unevenly
distributed in the drum.
Vibrating noise
Not all leveling feet are
resting firmly and evenly on
the floor.
Floor not rigid enough.
Water leaks every
Hoses not installed correctly.
load
Too much detergent or
Excessive sudsing
incorrect detergent.
34
Reason
• After providing the power again, press the
Power button with the control panel of
Main Washer or the remote control.
• For safety reasons, the drawer may not
open when the washing machine is at
a high temperature inside. This is not a
malfunction, and the drawer will open
after a period of time.
• When pressing the Start/Pause button
during washing, the drawer is unlocked
after drainage for safety.
• Stop washing machine, check drum for
foreign objects. If noise continues after
washing machine is restarted, call for
service.
• If sound continues, wash load is probably
out of balance. Stop and redistribute wash
load.
• Pause the cycle and redistribute the load
after the door unlocks.
• Remove packing materials.
• Pause the cycle and redistribute the load
after the door unlocks.
• See Leveling the Appliance in the
Installation section.
• Make sure that the floor is solid and does
not flex.
• Check all fill and drain hose connections
to ensure that they are tight and secure.
• Reduce the amount of detergent for
lightly soiled laundry. If you use too much
detergent, excessive bubbles will remain
after rinsing.
EN
Solution

Advertisement

Table of Contents
loading

Table of Contents