Table of Contents
Advertisement
Switch off the TV
Press
on the TV.
The standby LED switches to off.
Note: Though your TV consumes very little
energy when it is in standby or switched off,
it does use some energy. If you are not going
to use the TV for an extended period of
time, disconnect the TV from the mains plug.
Automatic switch off
You can save energy with this TV's energy
efficiency settings, which are enabled by
default. If there is no user interaction (such
as pressing a remote control button or a
control on the TV) for four hours, the TV
will automatically switch to standby.
To disable automatic switch off
1. While you watch TV, press the Green
button on the remote control.
2. Select [Auto switch off], then press OK.
3. Use the Navigation buttons to make a
selection, then press OK.
Adjust TV volume
Increase or decrease the TV volume
•
Press
+/- on the remote control.
Mute or restore the TV volume
•
Press
on the remote control to
mute the volume.
•
Press
again to restore the volume.
Adjust headphone volume
1. Press
.
2. Select [Setup] > [TV settings] > [Sound]
> [Headphone volume], then press OK.
3. Select a level.
Switch TV channels
+/- on the remote control.
•
Press
Press the Numeric buttons to enter a
•
channel number.
Manage favorite channels
You can view all channels or only a list of
your favorite channels.
Create a list of your favorite channels
LIST.
1. Press
The channel list is displayed.
2. Select the channel to mark as favorite,
OPTIONS.
then press
3. Select [Add/remove favorites], then press
OK.
The selected channel is marked with a star.
To remove a channel from the favorites list,
select [Add/remove favorites], and then
press OK.
Display your list of favorite channels
LIST, then press
1. Press
2. Select [List] > [Favorites] to display
channels in the favorite list.
3. Press OK to confirm.
Manage channel lists
After the channels are installed, you can:
•
Filter channels.
•
Switch between antenna and cable
channels.
•
Rename channels.
•
Lock a channel.
Filter channels
1. While you watch TV, press
2. Press
OPTIONS, then select [Filter].
3. Select an option, then press OK.
•
[Digital + Analog]: Display all channels
in the channels list.
•
[Digital TV channels]: Display only
digital channels.
OPTIONS.
LIST.
EN 11
Advertisement
Table of Contents
