LG 40UH62 Series Safety And Reference page 17

When installing the wall mounting bracket,
it is recommended to cover the stand hole
using tape, in order to prevent the in ux of
dust and insects. (Depending on model)
Stand hole
When attaching a wall mounting bracket
to the TV, insert the wall mount spacers
into the TV wall mount holes to adjust the
vertical angle of the TV. (Only when the
item of the following form is provided)
Provided
Item
Wall Mount
Spacer
Depending on the shape of the stand, use
a at tool to remove the stand cover as
illustrated below. (e.g., a at screwdriver)
(Only when the item of the following form
is provided)
Flat tool
Connections
(noti cations)
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device's
connection, refer to the manual provided with
each device.
Available external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices.
NOTE
The external device connection may di er
from the model.
Connect external devices to the TV regardless
of the order of the TV port.
If you record a TV program on a DVD recorder
or VCR, make sure to connect the TV signal
input cable to the TV through a DVD recorder
or VCR. For more information of recording,
refer to the manual provided with the
connected device.
Refer to the external equipment's manual
for operating instructions.
If you connect a gaming device to the TV, use
the cable supplied with the gaming device.
In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change
the PC output to another resolution, change
the refresh rate to another rate or adjust
the brightness and contrast on the PICTURE
menu until the picture is clear.
In PC mode, some resolution settings
may not work properly depending on the
graphics card.
17