Network Technologies Incorporated SM-X-15V-LC Series Installation And Operation Manual page 27

Video matrix switch
Table of Contents

Advertisement

NTI VEEMUX VIDEO MATRIX SWITCH
To quickly clear the selected radio buttons press the Clear Changes button. This will only work if the Submit
button has not already been pressed with the selections made.
To quickly connect all outputs to a single input, click on the desired input.
FYI: See page 29 for an example of using the Outputs Scanning Sequences feature.
To save a configuraton, from the Stored Configurations user interface, use the drop-down list to select the
desired slot (numbers 0-99) to save the active configuration into and press the Save button.
The webpage configuration that loads after a Save is the configuration that was actually saved.
To load a saved configuration, from the Stored Configurations user interface, use the drop-down list to select the
desired configuration. Then press the Load button. The VEEMUX will make the connections and the screen will
refresh to show the connections associated with that configuration selection.
.
To blank the video to a specific output, click the box to the right of "Blank" that corresponds with the desired
output to place a checkmark in it. The video going to that output will be disabled.
To enable the scanning sequence configured for an output, configure the automatic scanning sequence of
inputs that should be viewed at the output (see page 28) and then click the box to the right of "Sequence Enabled"
that corresponds with the desired output to place a checkmark in it. The video viewed from that output will switch
from input to input according to the configured sequence.
Note: This will save the currently active configuration on
the VEEMUX. If changes have been made in the web
interface without first pressing the Submit button, those
changes will not yet be part of the active configuration.
Note: If changes to the active configuration have been
made by another user prior to saving the current
connection selections, the changes made by the other user
will be saved as the configuration.
23

Advertisement

Table of Contents
loading

Table of Contents