Samsung HG40ED790 Installation Manual page 23

Hotel TV Function
Category Item
REACH 3.0
REACH Channel
Group ID
Ticker
REACH
Solution
REACH Update Time
REACH Update
Immediate
Room Number
REACH Server Version
Network Setup
SmartHub Model
Network
Setting
SmartHub Setting
Widget Mode
Solution Type
Server URL Setting
License Server IP
Setting
Widget
IPTV Mode
Solution
Virtual Standby
Instant On
Room Num Setting
Self Diagnosis
for TV
Self Diagnosis for HTV
System
SW Update
Service Pattern
Sound Bar Out
Contact Samsung
Standby LED
TV Reset
Initial value
• ON: The feature of REACH 3.0 in this TV becomes available.
OFF
• OFF: The feature of REACH 3.0 in this TV becomes not available.
Assign a DTV channel number to carry the update REACH data. This channel number
...
must be the same as the number set on the Reach server.
Select the Group ID of the REACH server.(Refer to the REACH server manual for more
...
details.)
• ON: The Ticker content is displayed.
OFF
• OFF: The Ticker content is not displayed.
Lets you set when data such as updated SW, cloning files, and S-LYNC REACH
contents is downloaded from the REACH server to the TV :
1hour Every hour
2hour: Every 2 hours
...
12:00 am: every 12:00 a.m.
2:00 am: every 2:00 a.m.
12:00 pm: every 12:00 p.m.
2:00 pm: every 2:00 p.m.
• ON: Whenever the TV enters standby mode (the power cord is plugged in and the
power is off), the REACH data is updated on the TV.
...
• OFF: The REACH data is only updated on the TV at the REACH server update time.
... Set the Room Number.
... The version of REACH Server is displayed.
Set an IP address to establish an Internet connection.
Set SmartHub Model.
Set up SmartHub.
ON Widget Mode ON/OFF.
Vendor
Select type of solution (Vender Server/ SINC Server).
Server
Set server URL.
Set server IP.
ON IPTV mode On/Off.
Virtual Standby mode On/Off.
OFF
When Virtual Standby is On, TV power consumption will be 9.5W to 17.4W (Depending
on the size of the TV screen).
OFF Setup booting mode.
Set Room Number.
Enter Self Diagnosis Menu.
• Picture Test: Use to check for picture problems. If the problem appears in the test
picture, select Yes and follow the directions on the screen.
• Sound Test: Use the built-in melody sound to check for sound problems. If the
problem occurs during the test, select Yes and follow the directions on the screen.
HD Function Check Menu On Executing Item Below OSD is displayed ProIdiom DTV
Channel Key Loss : Ok/Failure (Hotel US) STB SI Vendor
Setting : SI Name Ok/Failure
Bathroom AMP : Ok/Failure (Hotel EU)
RTC : Ok/Failure (Hotel EU)
PC Audio Test : Ok/Failure
PC Self Test : Ok/Failure
SW USB Update function
OFF Same function with SVC Service Pattern
ON: TV speaker sound will be mute. Sound will come out through HDMI.
OFF You must connect the Sound Bar to hear the sound.
OFF: Sound will come out through TV speakers normally.
Display the web site of related Samsung service center, software version, and Mac
address information.
When the TV is in standby mode, you can configure the settings of external LED.
ON • ON: The LED is on.
• OFF: The LED is off.
Returns all settings on the TV to their factory defaults.
Description
23
English